Newbie help please ...
 
Notifications
Clear all

Newbie help please PIC Programming Renard TR16

5 Posts
4 Users
0 Reactions
3,440 Views
Posts: 3
 cdg
Topic starter
(@cdg)
Active Member
Joined: 13 years ago
[#27418]

Hello , Hope i might get the answer faster this way than trying to search i recently purchased the Renard TR16 kit from radiant holidays and now i notice i might have to program the PIC? Ok stupid question what does that do and how do i do it and why? Does it not come pre programmed??? :ohwell:


4 Replies
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Hi cdg - I would suggest you contact the vendor at Radiant-Holidays to determine if it should be programmed or not and for general help for the Renard Plus controllers you should probably go over to diychristmas.org as all of the developers are over there. It's possible the PIC is not programmed, you will have to pick up a PIC programmer and program it yourself or you can ping folks near you and see if they can program your PIC for you via snail-mail...


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

To my knowledge, you do have to program it. You will need a PIC programmer that can attach to the ICSP header on that board. You can download the files to program the PIC with from here.

That should be all you need, but if in the future you get into other controllers, you may need the socket too.

You can also watch my video for help.
http://doityourselfchristmas.com/forums/showthread.php?18186-PIC-programming-using-MPLAB-MPASMWIN-software


Reply
Posts: 3
 cdg
Topic starter
(@cdg)
Active Member
Joined: 13 years ago

Thanks for all the help i will need more hope to slowly build up my show!!!!!!


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

If you update your profile to let people know (roughly) where you are... someone who is local to you might be able to assist with the programming.


Reply
Share: