Finally got around to building a Lynx DMX Dongle and hooking it up to a Ren64 with the Renard DMX firmware.
Phil - I'm sure that this test didn't use the latest version. I believe I used the 20080122 version.
Using the on-board LEDs as my reference, it appears that the Lynx Dongle is handling the 25msec interval without any problem. This is a much better performer at that interval than the Enttec Pro dongle was.
While running a constant 25msec on/off sequence, I can see that occassionally there are moments the sequence repeats an event.
So decided to compare a regular Renard and a Renard-DMX on the oscilloscope. Top trace is Renard and bottom trace is Renard-DMX.
It appears that both sets of firmware have issues with maintaining the 25msec interval. However, they both seem to have issues at about the same time period so maybe its not the firmware but my computer that cannot maintain a constant 25msec interval for sending out data.
Personally, I can't see doing any sequencing at 25msec interval, that is just way too many little squares. But for those who are considering DMX and using 25msec intervals then I would say they need to use the Lynx dongle (or maybe some other that we haven't tested yet) and stay away from the Enttec Pro.
RavingLunatic wrote:Personally, I can't see doing any sequencing at 25msec interval, that is just way too many little squares.
Yes, makes the eyes hurt when sequencing. 😉 ...
\dmc

