I would like to offer as well.
Bill
wbuehler wrote:I would like to offer as well.Bill
I'm waiting for my Pic 2 kit. I'll have so many questions when it arrives you will wish you just drove over and did them for me! LOL Mostly I want to have the tool and know how to do it. If I need to replace one or change something in an hour, I want to be able to do it.
jeffathompson wrote:..... Mostly I want to have the tool and know how to do it. If I need to replace one or change something in an hour, I want to be able to do it.
Those are the 2 best reasons anyone who runs a pic should have a programmer and know how to do it.
Very good choice!
That's the exact reason why I bought a cheaper programmer off ebay and the PIC reference book suggested by mrpackethead in THIS THREAD.
The book arrived and I've started reading. The programmer finally arrived the other day and I immediately started playing around with it. The only hiccup was the CD that came with the programmer was in Chinese. I managed to click on the correct Chinese words to get the software loaded (in english thankfully) and I think that I've got things figured out. I think I've correctly programmed a few PICs but now I need to test them in the controller.
One step at a time.
But now, once I'm done with the book, I'll know how these things work and hopefully be able to use them in other projects as well.
Macrosill wrote:Those are the 2 best reasons anyone who runs a pic should have a programmer and know how to do it.Very good choice!
OOOOOOOOO the MicroChip box came today!!!!!!!!!!!!!!! I gotta get the last 12 SSR's put tegether so I can clean the workbench and see if I can do this. OOOOOO you guys get ready I'll have questions on this one I'm sure.
jeffathompson wrote:OOOOOOOOO the MicroChip box came today!!!!!!!!!!!!!!! I gotta get the last 12 SSR's put tegether so I can clean the workbench and see if I can do this. OOOOOO you guys get ready I'll have questions on this one I'm sure.
Ok so I was looking at my last post on this. 6/13 I got the programmer. Well now I have more renard's than I had pre-programed pics and a whole bunch of blank ones.
Out of the box and in goes the first disc. Follow directions. Go through lessons 1 through 12, all work, so far about 2 hours. Download the firmware and do the same steps as the lesson guide. Three minutes later, I have 3 programed Renard pics.
I guess I was just scared to start. You really don't have to completely understand what all the commands in the firmware mean or what they do, leave that to the pros, you just need to know how to load it onto the pic, and erase it and reload it if something goes wrong with one.
I have come to the conclusion that having a Renard without a pickit is like having a car without a jack. No way to change the tire.
I know, it's $65. I made my living with tools for many years and have $75,000 worth in the garage. The good ones make it much easier. If you can get the cheap one to work, great.
jeffathompson wrote:
I made my living with tools for many years and have $75,000 worth in the garage. The good ones make it much easier. If you can get the cheap one to work, great.
No truer words have been spoken. There is no substitute for having the right tool for the job!!
Hi Wayne,
I have a Q. I am considering adding DMX flood lighting to my Xmas display next year. I currently have 5 Renard ss24 boards programmed with the default Ren firmware. I believe that I would need to flash all renard PICs w/ the DMX firmware since I would use the flood lights spread across most of the boards. Aside from the re-flashing, would I need any special hex coding to deal with any assignments?
TIA
MikelMD wrote:Hi Wayne,I have a Q. I am considering adding DMX flood lighting to my Xmas display next year. I currently have 5 Renard ss24 boards programmed with the default Ren firmware. I believe that I would need to flash all renard PICs w/ the DMX firmware since I would use the flood lights spread across most of the boards. Aside from the re-flashing, would I need any special hex coding to deal with any assignments?
TIA
Just the DMX flash is all you need to my knowledge. I really don't fool with it. I always have used Renard.
Its been about 3 years but iirc you flash the first pic on the board with the dmx firmware and indicate the start address for that board. The rest of the pics on that board get flashed with the dmx firmware and a start address of 1.
