dirknerkle wrote:It's a manual conversion insofar as there's no software converter available -- at least that we've ever found.
Actually, there does seem to be a fairly quick/reliable way to do it, at least from initial testing.
mrpackethead wrote:What do you guys use to convert the Express PCBs into Gerbers with?
I used a PDF print driver (PDFCreator) and a newer version of Pdf2Gerb to generate the example Gerbers in the first post. After installing the software components, it took about 30 seconds to generate the PDFs and another 30 seconds to run those through Pdf2Gerb to convert them to Gerbers for each of the example ExpressPCB files that I used.
dirknerkle wrote:you just name them according to their file naming structure, pack them up in a zip file and upload it. They have an instant-checking system that validates your file immedately after uploading so you can view the various layers, after which they run it through their final checking system and send you an email telling you whether there are any specific problems or not. You usually get the email within a half-hour or so and if the file is approved, at that point you have the option to order them for production or just keep them on file in your own personal library. They have some specific naming conventions for the various layers (picture attached) that appear to be the same as Eagle and it costs you nothing to create an account and use the upload/checking system.
Thanks for the info. I tried uploading them and BatchPCB says "failed". When I click on the View link it gives me an error about no image found and no details about what the actual problem is. I'm not sure if that means that there was a problem with the Gerbers, or maybe I just left out another file that it wanted. Since the sample Gerber files looked okay to me in both ViewPlot and Gerbv, I assume that if there is a problem then it's more of a packaging issue than a Gerber formatting issue, and easily corrected.
Thanks also for the tip about DipTrace. It looks like a friendlier alternative to Eagle. I like that the hobbyist/freeware versions do not have a size limit - I ran into that limit immediately when I started using Eagle, so I went back to ExpressPCB for a while. I think I will try DipTrace the next time I move away from ExpressPCB.
don
djulien wrote:Thanks also for the tip about DipTrace.
+1 on DipTrace.
There's also a version that runs on a Mac -- though in some weird X11 emulator thing -- and now that I've upgraded to an Intel-based desktop machine, I can work on boards right here where I do 90 percent of my other work.
But I've got to punch through two major work-related projects before I get some free time to work on boards.
\dmc
