Firework Light Simu...
 
Notifications
Clear all

Firework Light Simulation

117 Posts
41 Users
0 Reactions
122 K Views
Posts: 67
(@bhays)
Trusted Member
Joined: 18 years ago

I have been researching this project pretty heavily and I am coming to the conclusion that to build anything I will be satisfied with it is going to have a materials cost at least 2/3 of what I can buy the commercial units like Lightazmic used. I am very open to other ideas, though.

The smaller ones have 48 stalks and the larger ones have 60... sockets, bulbs and connectors alone will be big bucks. My source in China where I have purchased other items like my flame projectors and lasers can sell me the 20 foot model for under $800 and the 13 foot for $460. The shipping will be pricey and that's what I am trying to work out right now... it will have to be sea freight which I have done before, but trying to avoid the duties is key.

At any rate, I have the installation manual for these that gives a little more detail on how they work. There is a main circuit board at the base of the pole and several more in the head for the stalks...

I did run ac

4137469313 c2ef562e00

Reply
Posts: 221
(@stanward)
Estimable Member
Joined: 18 years ago

Hi Bhays!

Thank you for the information. I would be interested in purchasing one if you can import it from China. I'm not sure if you're willing to do a group purchase or anything like that. But the cost of duties, shipping, etc. could be split amongs the participants.

What do you think?


Reply
Posts: 1065
(@olingerjccj)
Noble Member
Joined: 17 years ago

I think this is worth looking at. I love the 4th of July so why not. I am figuring 48 channels. 4 for the base 1 for the center then 4 zones at 10 chs each. May not be to the grand scale but it looks cool. Messed around with it in Vixen if you want to look at my 1st attempt here it is.


Reply
Posts: 67
(@bhays)
Trusted Member
Joined: 18 years ago
stanward wrote:Hi Bhays!

Thank you for the information. I would be interested in purchasing one if you can import it from China. I'm not sure if you're willing to do a group purchase or anything like that. But the cost of duties, shipping, etc. could be split amongs the participants.

What do you think?

I am interested in doing something like that, but I am not sure we can make it work with the shipping. The duties are going to be due at the sea port (which for me is either Cincinnati or Indianapolis).. we would all have to pay those at our individual ports. If we were to get enough orders together to do a full container, we would still have to ship back out to the individuals. What I would love to do is figure out a way to just use my own pole... the shipping on the steel pole is the problem.


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

After reading this thread this morning, I remembered a place I pass on my way to a client North of Cincinnati. I was in the area this afternoon, so I decided to stop in. Unfortunately, the owner wasn't there, but I did talk with one of his guys as well as see the Fireworks and Palm trees up close.

http://www.lightedpalmparadise.com/

He has two different size Fireworks. It looks like he had a number of both sizes in stock. He's certainly a bit more than the direct from China route, but I'm guessing if a number of you guys were interested, he would give us even more of a discount.

Also,
He's an importer, so I was actually hoping to talk to him about Rope Light as well as LED Light Strands. He currently buys the Fireworks and Palms by the container. His employee said that he may be willing to do "partial" containers.


Reply
Posts: 67
(@bhays)
Trusted Member
Joined: 18 years ago

Yeah, I found his site online last night. He has 18' for $1295 and 24.5' for $1995. I am interested to hear what he would do on a group buy. Shipping will be $400-$500 from China I am sure.


Reply
Posts: 221
(@stanward)
Estimable Member
Joined: 18 years ago

Count me in either way!

If we actually got a hold of one complete unit, we could try and build one ourselves as well!


Reply
Posts: 67
(@bhays)
Trusted Member
Joined: 18 years ago

Actually, I just had email from my vendor in China who said he can ship without the poles (lampstandard as he calls it). Should save a lot. I will keep you posted.


Reply
Posts: 221
(@stanward)
Estimable Member
Joined: 18 years ago

I don't think we would need the poles, we could try and build that ourselves.

Thanks for doing all of this "legwork" for us.

bhays wrote:Actually, I just had email from my vendor in China who said he can ship without the poles (lampstandard as he calls it). Should save a lot. I will keep you posted.

Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago
stanward wrote:Count me in either way!

If we actually got a hold of one complete unit, we could try and build one ourselves as well!

I wish I would have known I was going before I left. I would have taken a Ton of pictures. Couple thoughts:

1. The pole was heavy gauge metal with a 4-hole bolt-down base.

2. The setup was very simple and quite frankly it looked like something we could certainly build. The spokes appeared to be fiberglass rods with LED Rope Light attached to them.

One of the things I was hoping to ask him is if we could purchase a parts kit without the main pole or controllers. Since we would likely control them with LOR, Vixen, or LSP.

bhays,
Please continue your efforts to check on pricing and availability. I didn't want to step on toes, but when I saw your picture, I realized that I had seen it before.

I will let you know as soon as I hear something

Kelly


Reply
Page 5 / 12
Share: