Notifications
Clear all

shiftbrite

4 Posts
4 Users
0 Reactions
2,401 Views
Posts: 215
Topic starter
(@shocker)
Reputable Member
Joined: 19 years ago
[#17837]

I have buy some of those rgb led
http://macetech.com/store/index.php?main_page=product_info&products_id=5&zenid=53a2649b74f48761b8ed05fe5ab34033
is there anyway to control them with renard


3 Replies
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
shocker wrote:I have buy some of those rgb led
http://macetech.com/store/index.php?main_page=product_info&products_id=5&zenid=53a2649b74f48761b8ed05fe5ab34033
is there anyway to control them with renard

The Renard-style controllers are oriented towards controlling lights via individual pulses or PWM (either individual DC LEDs directly or optocouplers to higher voltage lights). The description of the Shift Brite pixels sounds like they use a serial data interface, which is different. So, you would need to change the Renard firmware or circuit if you wanted to use a Renard to control these, or just use a different type of controller.

don


Reply
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

Wow, is it just me or are those a bit pricey compared to other pixels we use around here??


Reply
Posts: 4
(@macegr)
New Member
Joined: 18 years ago

They were discussed on these forums back in 2008 and 2009, when they were originally released. At the time, they were about half the cost of the nearest comparable LEDs, the Color Kinetics strings. A couple of forum members also made their own versions using the same controller chip. However, the "Chinese pixels" become available soon after, and have been improving over the past couple years (though still less color depth).

The controller chip in the ShiftBrite is under-utilized, therefore more expensive than the "Chinese pixels". I'm also only able to manufacture them in batches of 3000, so we can't leverage high volume pricing. Ideal setups for ShiftBrites are ones where you need between 5 and 50 RGB pixels, varying cable lengths between pixels, or 10 bits per color PWM. I'm not complaining about the Chinese pixel strings (or G-35) because I knew it would happen, and we never marketed ShiftBrites as a complete Christmas decoration solution, mostly hobby and small effects solutions.


Reply
Share: