Well - - as this is DIYC, the obvious recommendation would be to go with a Renard based controller since this is the home of them. They can be configured to run as DMX or Renard protocol devices and can be configured with specific addresses in DMX mode or left as-is and they are self-addressing which makes things easy to set up. There have been hundreds of folks that have put these together as total noobs so you would have lots of company if that's where you fit in. If you follow the instructions and take your time, they are fairly easy to build and it saves you a lot of money in the end. There is a certain satisfaction in explaining to others that you built them yourselves as well.
You can also watch the buy/sell forum here - there are folks selling their controllers all the time.
budude wrote:Well - - as this is DIYC, the obvious recommendation would be to go with a Renard based controller...
While I'm not a lor fan, just because this is the diy forum is meaninglessness. Use what's best.
I've heard many arguments on diy. Buying a pre-made board doesn't disqualify from being diy. Just like buying pre-made lights or power supplies, which most do.
James
Sent from my SM-G900V using Tapatalk
Phrog30 wrote:While I'm not a lor fan, just because this is the diy forum is meaninglessness. Use what's best.I've heard many arguments on diy. Buying a pre-made board doesn't disqualify from being diy. Just like buying pre-made lights or power supplies, which most do.
James
Sent from my SM-G900V using Tapatalk
Not sure how LOR is "best" - especially when talking about the cheaper versions - - they don't use magical components - in fact if you look inside they are essentially the same. And yes - I know what I'm talking about - I started with LOR controllers myself (the top ShowTime controllers) so I know what's inside them. With the DIY controllers you have MANY more options - 8, 16, 24, 64, etc channels, AC, DC, wireless, multi-purpose, etc, etc. So - yes indeed I would argue that the Renard controllers (either the Legacy ones here or the reboots on diychristmas.org) are better in that respect and they are much cheaper as well. I have nothing against LOR - they are a fine product but there are better - or at least as good options out there.
budude wrote:Well - - as this is DIYC, the obvious recommendation would be to go with a Renard based controller since this is the home of them. They can be configured to run as DMX or Renard protocol devices and can be configured with specific addresses in DMX mode or left as-is and they are self-addressing which makes things easy to set up. There have been hundreds of folks that have put these together as total noobs so you would have lots of company if that's where you fit in. If you follow the instructions and take your time, they are fairly easy to build and it saves you a lot of money in the end. There is a certain satisfaction in explaining to others that you built them yourselves as well.You can also watch the buy/sell forum here - there are folks selling their controllers all the time.
+1 🙂 This forum and the Renard controllers are what enabled me to join this hobby and have fun assembling light controllers etc. .
Renards have excellent support , are very affordable and have great reliability .
These are just a few of the things that come to mind , not to mention the flexibility they offer . 🙂 🙂
budude wrote:Not sure how LOR is "best" - especially when talking about the cheaper versions - - they don't use magical components - in fact if you look inside they are essentially the same. And yes - I know what I'm talking about - I started with LOR controllers myself (the top ShowTime controllers) so I know what's inside them. With the DIY controllers you have MANY more options - 8, 16, 24, 64, etc channels, AC, DC, wireless, multi-purpose, etc, etc. So - yes indeed I would argue that the Renard controllers (either the Legacy ones here or the reboots on diychristmas.org) are better in that respect and they are much cheaper as well. I have nothing against LOR - they are a fine product but there are better - or at least as good options out there.
Lor is not best, I think they are crap. You missed my point, but it's ok.
James
Sent from my SM-G900V using Tapatalk
I appreciate all the input and you guys have answered my questions. I was only asking about the LOR's as that is what I first came across and invested in for this past Christmas. I bought it as a kit and had no problem putting it together. So soldering, making cables, etc. is not a problem.
I cam across LOR's first and that is what I invested in this past Christmas. I just want to be able to reuse them if I can and i now understand that with the proper firmware they will recognize DMX.
For pixels I have the new Falcon on order and can't wait to take if for a test flight. I will look into the Renards if I have a need to expand AC controllers. But the 16 channel LOR should be more than enough. I'm taking a pretty big plunge into and ordering pixel ribbons for 2016.
Thanks all.
Lot's of people here have sold their lor and double or triple their channel count with renards.
Skunberg wrote:Lot's of people here have sold their lor and double or triple their channel count with renards.
This is going to be my first year and I also found lor first. Even w/ buying kits during their sales the most I was looking at was maybe 3 for 48 channels, but w/ the Renard SS24 I am getting 3 for 72 channels at less than half the cost, which means if I get everything built I have planned in time I may be able to add more (maybe another 32-48channels for singing faces) and still be less than the lor option
Many people have been down that road. Sounds like you're going to have fun! !!
I actually stumbled across John Storm's web site last fall. One 16 channel LOR AC controller and 1 24 channel dumb RGB controller and I had my first light show this past Christmas. Although simple my family and friends loved it. I don't regret the introduction with LOR, but certainly now heading down the path of xlights and smart pixels. I have my Falcon V2 on order and lots of pixel strings. So I am going from 40 channels to a capability of 32K. Which I think means I have more then tripled my channel count 🙂
I don't know if this is a hobby or an addiction?
