Protective devices
 
Notifications
Clear all

Protective devices

4 Posts
3 Users
0 Reactions
1,369 Views
Posts: 2
Topic starter
(@pep-seven)
New Member
Joined: 5 years ago
[#54769]

Just starting to put together a mega tree and some lights on the house controlled by a falcon controller for my first year. I see a lot of the prepared enclosures are just wiring 120 VAC directly into the power supply and the 12 VDC directly into the controller. I build panels for a living and we use protective devices such as fuse blocks or breakers all the time to protect the devices in the panel. Has anybody ran into surges causing problems or damages to the controller or power supply or should I not worry about this when building my enclosure?


3 Replies
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

I would hope you have a WHOLE HOUSE SURGE PROTECTOR. If yes, then that should cover the down stream devices. If not, get one and protect your inhouse devices like TV Refrigerator washer dryer sound system, WiFi system and etc.


Reply
th182
Posts: 159
(@th182)
Estimable Member
Joined: 11 years ago

As far as fuses go.. many of us have fuses between the power supply and controllers. There are also several vendors of fuse blocks/distribution boards on the forums.

Sent from my iPhone using Tapatalk


Reply
Posts: 2
Topic starter
(@pep-seven)
New Member
Joined: 5 years ago
mrGrumpy wrote:I would hope you have a WHOLE HOUSE SURGE PROTECTOR. If yes, then that should cover the down stream devices. If not, get one and protect your inhouse devices like TV Refrigerator washer dryer sound system, WiFi system and etc.

We do have protection upstream and surges was probably the incorrect term. The fuse blocks and circuit breakers we put in panels protects for surges as well as shorts in the system. I’m just thinking of an animal chewing some wiring and shorting out an output and frying the controller.

Sent from my iPhone using Tapatalk


Reply
Share: