Help with PICKit 2 ...
 
Notifications
Clear all

Help with PICKit 2 programmer

11 Posts
7 Users
0 Reactions
6,635 Views
wirekat
Posts: 23
Topic starter
(@wirekat)
Eminent Member
Joined: 19 years ago
[#3184]

Help with PICKit 2 programmer - Fixed - THANKS ALL

Got me a PICKit 2 programmer off eBay.

Downloaded the software and read the PDF (beginners guide).

It started loading the software into the programmer (I think) and
then it just sort of froze.
Now the data led stays on constant along with the power LED.
Windows doesn't recognize the programmer anymore (USB error).

Is there a way to get this thing to reboot? There is a function button but
it doesn't seem to do anything.

Oh and minimal instructions (if any) can with it.

Thanks


10 Replies
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

Is this the PicKit2 from Microchip or an ebay clone?


Reply
wirekat
Posts: 23
Topic starter
(@wirekat)
Eminent Member
Joined: 19 years ago

eBay clone


Reply
Macrosill
Posts: 9740
(@macrosill)
Member
Joined: 20 years ago

I have not used the one you have but maybe uninstalling the software and then reinstalling it might help.

Maybe you need an older version of MPlabs?


Reply
wirekat
Posts: 23
Topic starter
(@wirekat)
Eminent Member
Joined: 19 years ago

I did install and uninstall a newer vesion but the older version seemed to want to work.
The problm is with the programmer itself.
I'll try it.


Reply
Aurbo99
Posts: 2804
Moderator
(@aurbo99)
Member
Joined: 19 years ago

Some of those clone require a complete isolation of PIC from the ICSP which defeats the point of a an ICSP (In Circuit Software Programming)

A 10K resistor may be required on MCLR to pull it high on ICSP.

Cant really tell you which at this point.

I'm using a real PicKit2 redbutton, ICSP is the cats meow. =)

Cheers
Steve


Reply
TimW
Posts: 554
 TimW
(@timw)
Honorable Member
Joined: 19 years ago

Have you tried holding the function button down while connecting the USB?

http://www.voti.nl/pickit2faq/index.html


Reply
wirekat
Posts: 23
Topic starter
(@wirekat)
Eminent Member
Joined: 19 years ago
TimW wrote:Have you tried holding the function button down while connecting the USB?

http://www.voti.nl/pickit2faq/index.html

Thanks for the link - good info.

Funny, when I plugged the PICKit2 in this time the busy LED was blinking, not solid. SO I fired up the software and downloaded the software and all seems well. I'll try prgramming a chip now.

THANKS!


Reply
Posts: 234
(@dhavard)
Reputable Member
Joined: 19 years ago

Ok, I have read so much on the pickit2 I am now confused...lol I am getting the Pickit2 (not clone). Do I need the demo board like http://cgi.ebay.com/PIC-kit-2-ICD2-COMPATIBLE-PROGRAMMER-EXTENSION-PICkit-2_W0QQitemZ170229327003QQcmdZViewItem?hash=item170229327003&_trkparms=72%3A552%7C39%3A1%7C65%3A12&_trksid=p3286.c0.m14 ? Or could I go with like the Pickit 2 starter kit and program my pics for the REN16 (xmus) boards?

dhavard


Reply
WWNF911
Posts: 1722
(@wwnf911)
Noble Member
Joined: 19 years ago
dhavard wrote:Ok, I have read so much on the pickit2 I am now confused...lol I am getting the Pickit2 (not clone). Do I need the demo board like http://cgi.ebay.com/PIC-kit-2-ICD2-COMPATIBLE-PROGRAMMER-EXTENSION-PICkit-2_W0QQitemZ170229327003QQcmdZViewItem?hash=item170229327003&_trkparms=72%3A552%7C39%3A1%7C65%3A12&_trksid=p3286.c0.m14 ? Or could I go with like the Pickit 2 starter kit and program my pics for the REN16 (xmus) boards?

dhavard

The starter kit is what I've read WayneJ recommends. Might want to PM him just to be sure.


Reply
Page 1 / 2
Share: