Notifications
Clear all

Help

6 Posts
3 Users
0 Reactions
2,309 Views
Posts: 6
Topic starter
(@docgreen)
Active Member
Joined: 16 years ago
[#13524]

I'm new to all this. I simply want to use a parallel port to control my lights. My PC dosen't have one so I'm adding a pci/parallel card. nothings working, Can anyone give me some advice on what to do? Thanks


5 Replies
RichF
Posts: 1356
(@richf)
Noble Member
Joined: 19 years ago

check the address of your pci parallel card.


Reply
Posts: 6
Topic starter
(@docgreen)
Active Member
Joined: 16 years ago

sez lpt3 resource E880-E887 and E800-E807


Reply
RichF
Posts: 1356
(@richf)
Noble Member
Joined: 19 years ago

Ok and can you set that port in Vixen?

This is not one of the 3 address's vixen can right to.


Reply
RavingLunatic
Posts: 1502
(@ravinglunatic)
Noble Member
Joined: 19 years ago

You'll probably need to use the Simple 595 plug-in instead of the Olsen 595 plug-in and set the address in the plug-in as other.


Reply
Posts: 6
Topic starter
(@docgreen)
Active Member
Joined: 16 years ago

That was it! I set it to the port address in other in Vixen and it seems to be working for now. This was my third pci card. Thanks for your help. I wish you all a very Merry Christmas.


Reply
Share: