Buffer/line driver ...
 
Notifications
Clear all

Buffer/line driver - null pixel without pixel

347 Posts
90 Users
0 Reactions
197.7 K Views
Posts: 10
(@competer)
Active Member
Joined: 10 years ago

Rob, Can you provide instructions on how to solder the bridge for 5v use please.


Reply
Posts: 1344
(@mrsmoofy)
Noble Member
Joined: 12 years ago

Received mine today Thanks

Sent from my SM-G935V using Tapatalk


Reply
RobG
Posts: 1255
 RobG
Topic starter
(@robg)
Noble Member
Joined: 14 years ago
ComPeter wrote:Rob, Can you provide instructions on how to solder the bridge for 5v use please.


Reply
Posts: 10
(@competer)
Active Member
Joined: 10 years ago

Thanks for the image Rob. I'm guessing, but to change to LV we just drop some solder in the hole to bridge it or is this where to attach the 5VDC positive lead?


Reply
RobG
Posts: 1255
 RobG
Topic starter
(@robg)
Noble Member
Joined: 14 years ago

You have to "switch" solder bridge to bypass 5V regulator. Remove solder ball from the bridge and add new one on the LV side


Reply
Posts: 10
(@competer)
Active Member
Joined: 10 years ago

Thanks Rob. It doesn't paint a clear picture on what needs to be done so I'll wait until they arrive and then ask questions from there. Appreciate your time.


Reply
RobG
Posts: 1255
 RobG
Topic starter
(@robg)
Noble Member
Joined: 14 years ago

To switch from 12V-24V to 5V:

1. remove existing solder bridge

b1

2. all 3 pads should be separate now

b2

3. solder bridge on the LV side

b3

BTW, you can use boards with default setting of 12V-24V in 5V environment, but you will not get the full 5V on the data output (it will work, just not as good.)


Reply
Posts: 10
(@competer)
Active Member
Joined: 10 years ago

Thanks Rob. 100% exactly what I needed to understand what I need to do the switch over. Many thanks.


Reply
Posts: 127
(@kreeve)
Estimable Member
Joined: 11 years ago

What distance from the controller does it make most sense to put these at? Last year I could get a little over 15' to my spiral trees before I had problems without these. Should I put them at about 10' or closer to controller?

Experience welcome?


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

I put mine at 15'


Reply
Page 29 / 35
Share: