2 of the bad.
I have also 2 bad.
Sent from my SM-T710 using Tapatalk
Ouch, all these defective ones.
Sent from my iPhone using Tapatalk
RobG wrote:I just discovered a problem with the panel in the latest GB.
2 of the boards on the panel are bad, they have shorted input, so they will not work. If you have them, don't use them (you could fix it, but it won't be pretty.)
All 10 users who got 30 boards (one panel,) have 2 bad boards for sure, I will ship replacements ASAP or I will issue partial refund (mark on signup sheet which one you prefer.)
@Wolfie, you may have 2 or 4, let me know.
Other than that, there are additional 19-20 of you who got 2 bad boards. I will reopen GB signup sheet with new "BAD" column, make a note if you got bad boards and I will ship replacements or issue a refund.
About 20 orders are OK.Here's how to identify bad boards:
Look at the input pad and resistor, there's no trace connecting them, both are grounded.
Bottom row, first and second from the right.
Also, there was one bad board in the September GB. There were only 20 panels, which means 20 or less users were affected. Contact me if you have one.
stanward wrote:Ouch, all these defective ones.Sent from my iPhone using Tapatalk
He identified the problem and let people know all you have to do is go to the group buy spreadsheet and fill out how many defective you had.
It's actually not that bad, only ~6% boards have this problem.
Also 2 bad
Sent from my iPhone using Tapatalk
ok, gotta ask, are you going to do another GB?
what is the distance you might expect between pixel to pixel (transmitter to receiver)?
Rob,
I'm one of the list that received the 2 bad buffer boards. You can send me the replacements.
I can send you a pic of the board to confirm if you need.
Thanks,
Dan
Anyone want to sell me a few of these to try? 4/$10
I so wish I had seen this earlier!!!!
Cant send you a PM as your box is full.
I can't update the spreadsheet. I have two bad boards (Armstrong).
I am in Australia and only received the boards yesterday.
Thanks

