Xlights tree wrong ...
 
Notifications
Clear all

Xlights tree wrong output

6 Posts
4 Users
0 Reactions
2,567 Views
Posts: 10
Topic starter
(@galanflorin)
Active Member
Joined: 10 years ago
[#49863]

Hey there,
I'm building some mini-trees of about 150pixels each(3 strings of 50pixels) and I have a little problem with the output.
I do not know how to explain exactly so I will put 2 screenshots
Here is how my setup looks like, 25pixel per string with 6 strings.

And here is how it outputs my show 🙂 like it would be 50pixel pert string with 3 strings

Can someone point me in the right direction and tell me what I'm doing wrong here?:))
Thanks!

EDIT:
I'm using a nodemcu v3 and ESPixelStick library


5 Replies
Posts: 103
(@lugnut68f)
Estimable Member
Joined: 10 years ago

I'm going to reply to see if I'm correct too since I'm doing this in xlights for the first time myself. I think it should be 3 strings, 50 nodes per string and 6 strands. Try that and see if it works for you. If you have strings of 100, you will want to change it accordingly. The number of strands will dictate how many you see in the display and how many xlights will recognize.
Hopefully someone will check in to verify or correct us both.


Reply
Posts: 173
(@smerk)
Estimable Member
Joined: 10 years ago

nodes per string = 150
strands per string = 6


Reply
Posts: 10
Topic starter
(@galanflorin)
Active Member
Joined: 10 years ago

Thanks! I'm new at this and i'm still learning:)


Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago

Where's the screenshots? Did it work using 150 nodes and 6 strands?


Reply
Posts: 10
Topic starter
(@galanflorin)
Active Member
Joined: 10 years ago
Stormyblade wrote:Where's the screenshots? Did it work using 150 nodes and 6 strands?

Yes it worked, just that I left the city and can't upload a photo until Wednesday.


Reply
Share: