Window Layout
 
Notifications
Clear all

Window Layout

5 Posts
3 Users
0 Reactions
2,307 Views
Posts: 103
Topic starter
(@lugnut68f)
Estimable Member
Joined: 10 years ago
[#45572]

Hi All,

I'm thinking about going to pixel nodes around the windows on my house. I currently use ac. My question is, the windows on my porch are very wide with 3 sections. How do I lay them out so that i don't have to double up on the runs in the middle sections?
Yes, I'm a newbie to pixels, xlights and RPi so hopefully this isn't too dumb of a question.


4 Replies
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Not sure what you mean by double up? With pixels you would run one strip across the top, middle and bottom and then as many vertical strips as you need for window dividers. Then you lay out your objects on your sequencer with the pixels grouped to represent the parts of the window they span.

Unlike AC strings, the typical pixel implementation would have you connecting all of those windows to a single output on the pixel controller, making them one long chain. The magic happens in the patching and pixel assignments on your sequencing software and pixel controller.


Reply
paudyd
Posts: 140
(@paudyd)
Estimable Member
Joined: 13 years ago

Additionally, I would set it up in Xlights before you start to build. So that the layout is a logical, single long string like Martin said. Then you wont have to wish you had done it another way...like I did. Sometimes the software has defaults in the orientation that is easier to follow instead of having to modify.

Sure your extension might need to double back at some point but that probably will only be four feet (wider?) extra, at the most per window. Ten foot plugin extensions are sold by multiple vendors and the price is pretty cheap. I assume you will make a frame to hold the pixels and the wires can run inside the channels or PVC pipe. That is how I run my power injection wires.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Max extension is one half the height of the window. Go like this:

Start at lower left (you can start anyplace, I just like lower left).
run strip across lower edge of entire window
cut strip
run next strip up right side of window
cut strip
next strip across the top of the window
cut strip
next strip down the left side
cut strip
next strip across the middle of the windows (left to right)
cut strip
next strip (vertical) between the windows (bottom-to-top)

each "cut strip" is an extension of the data and ground wires to the next strip. I would also inject power at each cut.

I am using strips as an example here. On my home I am using bullet nodes in a boscoyo plastic strip zip tied to a pvc frame that allows me to take the lights down as a unit to work on them or store them.


Reply
Posts: 103
Topic starter
(@lugnut68f)
Estimable Member
Joined: 10 years ago

Thanks for all the info everyone. I have a lot more learning to do in xlights. Last year was pretty easy with Vixen and ac strings. This year is starting to be much trickier. I may skip the window upgrade and just add some candy canes and hoops to the yard and my current show.


Reply
Share: