WHM / Models and Ch...
 
Notifications
Clear all

WHM / Models and Channels

3 Posts
2 Users
0 Reactions
1,575 Views
Posts: 484
Topic starter
(@boof63)
Honorable Member
Joined: 15 years ago
[#36708]

HI can someone please tell me when setting up XL4 ,do the channels need to exactly match the models channek counts
e.g. I have on universe 1 - 110 pix =330 channels in two elements (300 ch on 4 arch + 30 ch on 10 coro stars)
on universe 2 - 88 pix =264 chn in 14 elemets ( 8x8pix candy canes + 6 x 4pix Bells)
etc for rest of display
so do I setup as (using HLS for sequencing)

E131, Multicast, 1 , 510 Channels 1 to 510
E131, Multicast, 2 , 510 Channels 511 to 1020
etc for each universe regardless of actual channels used for each universe

OR
E131, Multicast, 1 , 330 Channels 1 to 330
E131, Multicast, 2 , 264 Channels 331 to 595

Which I think is the way I need to do it if I want WHM to work within HLS

Cheers and thanks in advance for any answers
Boof63 :biggrin:


2 Replies
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

You can define 510 then only use a small number of them. I prefer that method in case you add a new display element later you won't need to renumber the start channel for any models. But if you need channel 264 to be on universe 2 then you need to define it the second way.


Reply
Posts: 484
Topic starter
(@boof63)
Honorable Member
Joined: 15 years ago

Thank you Gil, exactly what I was hoping for!!!! K.I.S.S. principle at work
thanks again,
Boof63


Reply
Share: