what am I doing wro...
 
Notifications
Clear all

what am I doing wrong?????

7 Posts
3 Users
0 Reactions
2,405 Views
Posts: 46
Topic starter
(@zanclus)
Trusted Member
Joined: 14 years ago
[#32396]

Ok I set up my 10 E1.31 universes in Xlights I set them as Unicast and assigned them the same IP as my 682 .Then save . I then Go to Nutcracker I set up my Models .No problems I open a music file , attach the timing tile all ok. I then add my models then create the effects. When I try to play t he effects I cant seem to get them to play in the real world. for some reason xlights isn't outputting to my E682 . On the 682 end When I go to the screen page I can set the demo mode ..works perfectly. I have the correct number of universes and pixel type count set. I am not getting any Packets. Can anyne help me with this.. I tried using LOR S3 to run and get nothing also


6 Replies
jlowe
Posts: 952
(@jlowe)
Noble Member
Joined: 16 years ago

Have you used the "test" tab of xlights to click various channels and make sure the controller is getting data?

Are you sure "output to lights" is checked?


Reply
Posts: 46
Topic starter
(@zanclus)
Trusted Member
Joined: 14 years ago

Yes to both questions...


Reply
jlowe
Posts: 952
(@jlowe)
Noble Member
Joined: 16 years ago

And, when you use the test tab, do you get responses from the lights?


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

A few things to check,

#1 did you also select Unicast in your E682 configuration?
#2 did you select start universe channel and number of outputs and type in the bottom of the E682 setup?
#3 Did you turn any test mode in the E682 to "0" before trying in XLights?
#4 did you select the check box at the top of the XLights window for output to lights?

Start there, a screenshot of your E682 setup and XLights setup would really help diagnose it as well.


Reply
Page 1 / 2
Share: