Walkway effect sync...
 
Notifications
Clear all

Walkway effect sync anomaly

6 Posts
4 Users
0 Reactions
2,259 Views
Posts: 54
Topic starter
(@terrevue)
Trusted Member
Joined: 8 years ago
[#55321]

Hoping someone experienced this and has a quick fix. I have lights on the ground running on both sides of a straight walkway from my front door to the sidewalk. Walkway01 and Walkway02. They are grouped into a single group, Walkway. In xLights, I can use single string effect and both strings are perfectly in sync. Kind of like runway lights. However, when output to the lights they are offset. I have verified all of the channels are correct and I've tried every rendering method and nothing works. Not a deal breaker, but would be a nice touch though. Any idea what might be causing this?

Thanks,
Chris


5 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Have you tried to drill down to the node level and see if the two strings match? If they do, I don't have a suggestion. If they don't, try to copy paste from 01 to 02.


Reply
Posts: 242
(@rsegreto)
Reputable Member
Joined: 6 years ago

Exactly, make sure they have the same node / pixel count. Assuming they are strings and not strips too. it's easier to mess up the pixel count on strips.


Reply
Posts: 54
Topic starter
(@terrevue)
Trusted Member
Joined: 8 years ago
rstehle wrote:Have you tried to drill down to the node level and see if the two strings match? If they do, I don't have a suggestion. If they don't, try to copy paste from 01 to 02.

They match because if I apply the effect to the individual models with aligned start times, it works perfectly. Only when I apply it to the group does it offset. I just went into the layout and made sure they were the exact same size and perfectly aligned. So weird. There is so much about this software I still need to learn...


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago
terrevue wrote:They match because if I apply the effect to the individual models with aligned start times, it works perfectly. Only when I apply it to the group does it offset. I just went into the layout and made sure they were the exact same size and perfectly aligned. So weird. There is so much about this software I still need to learn...

Yes, I have encountered weirdness occassionaly also. Try deleting the effect at the group level, and apply it at the prop level (01 and 02) and see how that works. I have a set of 10 candy canes that I have major issues with unless I apply the effect to each one separately..... have no idea why.


Reply
Posts: 79
(@bobsmith)
Trusted Member
Joined: 11 years ago

If you have them grouped, check the render style on the effect.

What xLights does when you group elements is draw a grid over the layout of the models you have grouped (essentailly forming a large matrix, and mapping pixels from that matrix to pixels in your grouped elements where they align), and if they're not exactly lined up vertically, the first pixel in each string may not be in the same row in the grid of the group, and thus you get an offset. Try changing the render style from "per preview" to "horizontal stack" or "horizontal per model" if they're next to eachother horizontally (left/right) in your layout display. This way any vertical misalignment won't matter, and it will treat them like they're stacked next to eachother horizontally and perfectly vertically aligned.

A related problem I just learned about is if you group a large number of models together, and suddenly effects that are one pixel (like twinkle or strobe) are now lighting up multiple pixels, the grid side of the group is too small, and more than one pixel is ending up in the same grid square in the group. Under group settings, there's a "maximum grid size" setting - that needs to be increased if you have un-wanted pixel grouping


Reply
Share: