two controller set ...
 
Notifications
Clear all

two controller set up in xligts

22 Posts
7 Users
0 Reactions
7,231 Views
Posts: 53
 JRF
Topic starter
(@jrf)
Trusted Member
Joined: 11 years ago
[#40197]

Hi all
I will soon have two alphapix16 controllers, I know how to set up one controller in xlights, but what about 2? My questions are:
1. Do I need to change the ip address on the second alphapix16 board and then input that "new" ip address in xlights, so it is different from the first one (the first controller will use the ip that comes set in the alphapix16).

2. This question may be a bit difficult for me to explain, but do the channel numbers for the models continue into the models that will be used in the second controller? Or do I start over at channel "1" for any models that will run off the new, second alphapix...?

thanks!
Jeff


21 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

1) yes new ip address for 2nd controller

2)xlights will number them in sequence


Reply
Posts: 204
(@m1anh)
Estimable Member
Joined: 12 years ago

ans.
1. Yes & Yes, you must assign a different IP to the 2nd controller. You can not have 2 IPs the same.
You create another copy of what you did the first time around, starting the Universe from 1.
xLights will auto add more channels.

2.Yes, try it and you will see. The Channel will increment, you will see it in the setup window.


Reply
Posts: 53
 JRF
Topic starter
(@jrf)
Trusted Member
Joined: 11 years ago

OK thanks, so I assume that I need to log into each alphapix16 board and tell it what channels from xlights to send to each output on the board....for instance, and for round numbers...alphpix16 board 1 set up to use channels 1 - 5000 from xlights, and then alphapix16 board 2, set up to use channels 5001 - 8000 from xlights...Am I on the right track here?
thanks


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

I don't think the AlphaPix knows about xLights raw channel numbering. You will more likely be telling it what universe and channel number (1-512) within that universe to use.


Reply
Page 1 / 5
Share: