I created a new video of some stuff I've worked on this weekend to enhance the ability to import effects from LOR generated sequences. In particular, my goal is to make it possible to take sequences purchased from the various vendors (I bought several really good sequences from holidaysequences.com) and pull them into xLights and be able to edit them. Anyway, this is stuff that should be available in 4.0.29.
(apologies for the sound when the music starts, it was too loud and drowned me out. Wasn't saying anything too important.)
that will be really nice to be able to do that. most of the sequences are for either 12 or 16 ccr but is there an easy way to increase it to work on say a 30 ccr megatre.
This looks awesome! Is it possible to add Vix 2.1 files to this as that would allow a lot of us to actually map our Vixen displays to Xlights in editable form?
Excellent work! Thanks for taking the time to post these videos.
BASSNBUCK wrote:that will be really nice to be able to do that. most of the sequences are for either 12 or 16 ccr but is there an easy way to increase it to work on say a 30 ccr megatre.
I see two meanings in this question and I'm not sure which question you are asking, so I'll answer both:
1) If the SuperStar setup and sequence is for a 30CCR tree, it should work find. We're grabbing the number of CCR's from the layout in the SUP file and mapping appropriately. Nothing special.
2) If you are referring to taking a 12CCR sequence and running on a 30CCR tree, it will "somewhat" work and results may depend on the types of effects in the SUP file. I've played with this a bit to see if I can take 12CCR stuff I already have and increase them to a 16 CCR model which I plan on using for my display next year. Morphs work "ok", the fan/spiral/shockwave things work "ok". They all come in and use relative locations (like 25% to the left of center or similar) and thus scale OK. However, if the original morph was 1 pixel wide, it will still be one pixel wide if you run on a 30CCR tree. Thus, you likely need to do some adjustments. For scenes, we create a picture of the original size (12x50) and use the Picture effect with "Scaled" turned on, so that would look OK. The major issue is the "Image" effects. They would be in their original size/position based on the middle of the tree.
Remember that importing a sup successfully depends on the layout, whether it was in ccr mode or visualization mode. I tried a file done in visualization mode and it didn't line up. I know Gil is aware of this, just FYI for anyone that didn't know.
Xenia wrote:This looks awesome! Is it possible to add Vix 2.1 files to this as that would allow a lot of us to actually map our Vixen displays to Xlights in editable form?
The problem with Vix (and HLS) is that we really just have the raw "data" for each time slice. We don't know if that pixel at the given point in time is supposed to be part of a "ramp up", "ramp down", or On effect. For fix, I'm not even sure if we know if a particular channel is part of an RGB triplet or not in which case color wash effects also come into play. For the non-RGB things, we could likely just loop through and create tiny On effects for each time slice, but I'm not sure if having 4K effects for each channel would be very "editable". We can optimize a bit by collecting values that are the same when next to each other, but the ramps would be a lot more difficult to deal with.
That said, I'd LIKE to do this eventually as much of my stuff is in HLS and I'd like to find a way to get that data migrated. With HLS, I can get the RGB stuff combined, but that still has the ramp detections color wash issues.
Phrog30 wrote:Remember that importing a sup successfully depends on the layout, whether it was in ccr mode or visualization mode. I tried a file done in visualization mode and it didn't line up. I know Gil is aware of this, just FYI for anyone that didn't know.
Yeah I just haven't had a lot of time the past week to dig into that. I know I didn't have code to handle if the CCR is in half mode where it's folded over. For yours I'm not sure why it didn't come out right for you and there are several factors including whether your model is defined correctly in xLights. What seemed strange to me is you gave me your visualization file and it displayed different on my screen than how it did for you. For me it displayed 50 high and 12 wide and for you it displayed 25 high and 24 wide.
CopperCreekLights wrote:What seemed strange to me is you gave me your visualization file and it displayed different on my screen than how it did for you. For me it displayed 50 high and 12 wide and for you it displayed 25 high and 24 wide.
Not sure on that one. I'm forcing superstar for a row and column, perhaps that didn't get translated on your end. I assume you opened in the latest version of lor?
My LOR version could be a little older. I think I updated around December.
