Tree Dazzler is it ...
 
Notifications
Clear all

Tree Dazzler is it hackable ?

63 Posts
19 Users
0 Reactions
35.1 K Views
Posts: 5
Topic starter
(@pastorandrew)
Active Member
Joined: 10 years ago
[#44281]
IMG 0169

Thought I would take a chance on buying a Tree Dazzler today at the store. They are normally 39.99 and they were on clearance for 9.99. I thought I could hack them and control with xlights. It certainly seems possible. The led boards inside the diffusers are just basic four wire dumb rgb. This seems simple enough, but the 5v power supply has a built in controller. Two wires come into the controller, these are V, and G. However on the other side of the controller there are four wires I expected to find three. I anticipated finding a data wire and voltage and ground. The four wires that are there are labeled V, G, 1, and 2. And ideas ? I have attached some picture for better understanding. Also these four wires then run from the controller to a a board inside the head of the unit that board then distributes these four to the eight strings of lights.

IMG 0168
IMG 0168
IMG 0166
IMG 0165

62 Replies
Posts: 255
(@rogerh)
Reputable Member
Joined: 12 years ago

That looks like a standard dumb pixel strip. Common positive and apply negative to R,G, or B to create the color combination you want. Red, Green, Blue.


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

watching a video of it, it does effects like smart pixels, so not sure how they are making a dumb string work like that, has to be other chips somewhere.


Reply
Posts: 252
(@vincerules)
Reputable Member
Joined: 14 years ago

Probably this:

4 wire - The four wires are: V+,GND,Data,Clock. Due to the Clock signal fading, you are often limited to only a few feet (<20ft) from the Pixel Controller to the first Pixel in a string without having to use Null Pixels. The cost of the extra wire makes 4 wire Pixels slightly more expensive. Many of the older IC Types use 4 wires.


Reply
paudyd
Posts: 140
(@paudyd)
Estimable Member
Joined: 13 years ago

What is in the top part? I think the smarts are in there. They look like dumb RGB strings running down the tree.

Sent from S6 using Tapatalk


Reply
Page 1 / 13
Share: