Setting up Strips i...
 
Notifications
Clear all

Setting up Strips in xLights

6 Posts
3 Users
0 Reactions
4,768 Views
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago
[#54203]

So I just finished building my arches using 2811 strips and want to be sure I have xLights setup appropriately. Since they are strips each arch has 48 nodes (2811 chips) with each chip controlling 3 clusters of led's with each cluster containing an R, G & B element.

So I know in xLights I need to state that each arch has 48 nodes but my question is how many "Lights per node" do I put? Since each chip is controlling the 3 clusters of LED's would I put 9 lights per node? I currently only have 3 lights per node as one would for bullet pixels but I'm not sure what to do in this case.

The Garlands effect doesn't work quite as anticipated, which might be because that effect addresses the pixels individually more so than others but I just want to be sure I have everything set up properly before changing the effect to act more like I want.

Thanks,
-Russ


5 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

you pretty much treat each pixel as a self contained entity. A pixel typically drives a SINGLE tricolor LED (sequencers do not care how many LEDs are in there). The fact that your strip has three tri-color LEDs incorporated into your single pixel does not really matter to the model. The model sees and works with your 48 pixels. It tires to make things look prettier in the preview when you tell the model that each pixel has three tri-color LEDs, but this does not affect how the data is generated and sent to your arches.


Reply
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago

Ah okay great so those settings are just for the preview. Glad it doesn't affect the actual performance of the lights.

Thanks,
-Russ


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Actually it does affect the lights. You are proramming how the lights receive info. Follow Martin's guidance.


Reply
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago
rstehle wrote:Actually it does affect the lights. You are proramming how the lights receive info. Follow Martin's guidance.

Sorry but this seems to contradict? You're saying that the settings of "lights per node" do affect how the lights receive the data / info but Martin's guidance is saying that the # of nodes controls the data package and not the lights per node.

So if I set it to 48 nodes the data package will flow to the actual lights during the sequence correctly regardless of how many lights per node I put. However xLights will change the preview to more accurately represent what the lights would look like in actuality when I change the lights per node right?

-Russ


Reply
Page 1 / 2
Share: