Output to Lights Gl...
 
Notifications
Clear all

Output to Lights Glitch?

8 Posts
3 Users
0 Reactions
4,930 Views
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago
[#54266]

I wanted to see if anyone has issues with the output to lights feature within xLights? I tested my arches right after I made them and the output feature worked with no real issues, maybe a slight hiccup here and there but all 4 arches worked and all was well.

I just finished my controller box build and added 3 smart receivers for my mega tree and now when I output to lights using the same port for my arches not all of them work sometimes, but others they are fine but then the color order is off? I didn't change any of the settings for that port in xLights or FPP and I can't figure out what would be causing these issues other than possible glitches within the output to lights option.

I wanted to confirm with anyone here to see if you've had issues / glitches outputting directly from xLights before I drive myself crazy trying to troubleshoot.
Thanks,
-Russ


7 Replies
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

I'm not aware of any problems with output to lights.
Most of the time a problem like this is in the settings of the controller or in FPP.
If the color order is off it could be several things, the port could be set up wrong by 1 or more on the channel count, set up off in xLights, if they are strips in prx tube then strips usually have a odd color order. Mine are something like GBR, not sure. There is a color order in xLigjts also that I overlooked last year that took me the better part of a day to chase down and correct.
Are you running a sequence or testing when outputting to lights? There could be lots of reasons for things not working properly. Give as much detail as possible and add some screen shots of your setup and someone on here will help you fine the problem. I'm not familiar with your controllers but some on here are.
Pixels are fun but come with a large learning curve! At least if was large for me anyway, lol. You will probably fine your problem in your setup somewhere but who knows, there could be something going on in output to lights, I'm just not aware of it. Good luck, hope you fine your problem soon,things like this get frustrating real fast, I know.


Reply
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago

Thanks for the reply! They are strips and the color order was set to GBR previously and I had no issues outputting to the lights whether it was a sequence or just a test. The only thing I changed was adding 3 smart receivers for my mega tree but I agree it seems like something with the port got messed up in the process.

This time around I was trying to output a sequence that I had done before when I noticed that only 2 arches would work. Then I reversed the order of arches, which shouldn't have mattered and all of a sudden they all worked. They I tried again in the same order that just worked and we were back to only 2 arches working.

I don't have my controller on at the moment to show you the FPP Settings but I'll fire it up later and take some screen shots. It's a kulp K8-PB which runs FPP and is in bridge mode now. I was thinking of switching it to remote master (I believe that's what it's called) uploading the sequence and seeing what happens then. That was when I was assuming it was an xLights output issue. I'm also running the latest version of xLights (2021.17) on my macbook air with the M1 chip. I was running it in Rosetta when I ran into issues with the Vamp Plug-ins but I had that setting turned on when I successfully outputted the sequences before.

More to come, appreciate the comments thus far!
-Russ


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

Something I just thought of. How long is wire from controller to first pixel? Are they daisy chained together? Could just be a data problem. I'm not knocking your controller, but I have heard that they don't send data out very far. Might not have anything to do with you switching things but simply stopping and starting over again if the distance is on the verge of being to far away. Just a thought.


Reply
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago

I was running them straight off of the pigtail both times (when it worked and also when it didn't). However during all of my troubleshooting and triaging I tried playing straight from the controller, switching it to master mode and playing off of the SD card with the same results.

I decided to keep the same setup and cut out the second arch.... then bam! Arches 3 & 4 lit up as well! I then moved arch 2 to the end of the daisy chain and all 4 arches worked! Now I feel that my 2nd arch has a data connection issue so I'll have to take it apart and look. Thankfully I figured this out in May and not November when I was going to set things up for real!

I'm going to test the linkage of all my props now to ensure they can all be placed in any order. So lessons definitely learned and I appreciate your thoughts and trying to help figure this out!
Thanks,
-Russ


Reply
Page 1 / 2
Share: