With the help of the Zoom room they found out why the sequence would not play.
About a week ago I was cleaning in back and around the computer and inadvertently knocked out the speaker plug in back of the computer. The sequencer will not play if you don't have a speaker hooked up.
Would have never guessed that one. Glad you posted back I'm sure this will help someone at some point.
oldandslow wrote:The sequencer will not play if you don't have a speaker hooked up.
I agree. That one wasn't in any troubleshooting that I would have looked for. Glad you found it.
As an IT support person, my first questions now are "Is it plugged in" and "When was the last time you rebooted the system" as these 2 questions fix 50% of the issues! KISS - Keep It Simple Stupid! 🙂 Start with the basics. Look at the simple things first. I used to dive into programming, the system, and all the advanced crap, then look over and see someone turned off the power strip that that pc was plugged into, but the monitor and everything else was plugged into another.
That xlights zoom room is an awesome tool.
