seperate network re...
 
Notifications
Clear all

seperate network required?

3 Posts
3 Users
0 Reactions
4,211 Views
Posts: 13
Topic starter
(@kenmc)
Eminent Member
Joined: 7 years ago
[#51716]

I'm about to start building my first pixelgrid to do some simple animations.
Just wondering if there's a point where the traffic being sent for the animations becomes a problem for other traffic on the network - specifically wireless - that it renders stuff like Netflix or even web browsing unusable?

in short, am i better off setting up a dedicate wifi ssid for lighting?

will likely be using raspberry pi to drive the sequence, and espixelstick on an nodemcu to actually drive the leds.

thanks


2 Replies
TomL8345
Posts: 1356
(@toml8345)
Noble Member
Joined: 15 years ago

SET UP A SHOW NETWORK. It is worth the effort. If you are using FPP you can also set it up as a bridge to talk to your show network from your home network.


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

A separate SSID is not enough. You want a separate AP (aka dedicated switch and radio) to segregate the wireless show traffic. The AP should create a subnet to keep the show multicast traffic from getting onto your home network. If all of your traffic is unicast, then a separate subnet is not needed.


Reply
Share: