Quick question abou...
 
Notifications
Clear all

Quick question about Renard

52 Posts
6 Users
0 Reactions
41.8 K Views
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

look at this picture your last picture shows you still putting chip in wrong place you can click on picture it should go larger and you see the red line I did that is where chip should be half the pins on 1 side and half on other

Screenshot 1

Reply
Posts: 55
Topic starter
(@cjrobin27)
Trusted Member
Joined: 8 years ago

So I moved it one slot toward the cable and it gives me the same error as before. Move it back and no error.
The instructions say I have to update the latest PIC devices list by applying a patch. I'm not sure how to do this. The .dat file is already in the program file folder.

IMG 6498

Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

did you move the chip so it is on each side and move it up 1 slot? new pic helps


Reply
Posts: 55
Topic starter
(@cjrobin27)
Trusted Member
Joined: 8 years ago
TazChaLet wrote:did you move the chip so it is on each side and move it up 1 slot? new pic helps

yes sir. Moved it to the middle and up one slot. When I moved it up one slot and the middle it gave me the error. Right now it's back one slot and in the middle....no error but the PIC is not showing up in PICkit 2 software.

Should I see the PIC16F688 under the device family?

IMG 6502
IMG 6504

Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

You should see the F16 in the small device category (sometimes in basic). You are in the medium device category.


Reply
Page 5 / 11
Share: