Notifications
Clear all

Nuts

8 Posts
5 Users
0 Reactions
2,816 Views
IdunBenhad
Posts: 1603
Topic starter
(@idunbenhad)
Noble Member
Joined: 18 years ago
[#26076]

Hi:
Ok, so I''m stupid, but I have now tried to install Nutcracker on a Windows 7 laptop four times, starting from scratch each time.

This program is exactly that: NUTCRACKER. I give up. The instructions are not clear, ignoring some directory entries and the PathEditor homepage, which is supposed to contain updates and help is non-existant. Patheditor does not work and shows many errors, which apparently cannot be corrected.

I know the author has worked hard on this, but this is much like a lot of other offerings for sequencers on DIYC, lotsa programming but no documentation.


7 Replies
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Have you tried xlights/nutcracker ?


Reply
IdunBenhad
Posts: 1603
Topic starter
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
No, but I'll give it a shot--thanks


Reply
Posts: 213
(@aaron1)
Estimable Member
Joined: 16 years ago

Agree with angus. Seems you're trying to use the old version. Try here...

http://nutcracker123.com/nutcracker/releases/


Reply
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago
IdunBenhad wrote:Hi:
Ok, so I''m stupid, but I have now tried to install Nutcracker on a Windows 7 laptop four times, starting from scratch each time.

This program is exactly that: NUTCRACKER. I give up. The instructions are not clear, ignoring some directory entries and the PathEditor homepage, which is supposed to contain updates and help is non-existant. Patheditor does not work and shows many errors, which apparently cannot be corrected.

I know the author has worked hard on this, but this is much like a lot of other offerings for sequencers on DIYC, lotsa programming but no documentation.

I havent been developing Nutcracker 2 code in over 8 months. In January of this year all Nutcracker development is now in teh xLights/Nutcracker code .

On the home page of nutcracker123.com/nutcracker the first paragraph says this

"There are two versions of Nutcracker, are you on the latest?

Nutcracker 2.0: This is the release of Nutcracker that resides on this web page you are looking at. This version runs in your browser. Version 2.0 is no longer being enhanced. There are currently no plans to turn it off so feel free to continue to use it, if you like.
Nutcracker 3.0: Matt Brown converted all of Nutcracker 2.0 effects into his xLights program in December 2012. xLights can run in Windows, Linux or MAC . This version is where all future development is being done. Nutcracker 3.0 is 10-50 times faster at creating effects as compared to Version 2.0. You may find the latest Version 3 Nutcracker code here: http://nutcracker123.com/nutcracker/release s"

since some people were still using Nutcracker 2.0, i chose to leave the links and page up.
I have tried to get the message out to move over to Nutcracker 3.
One big reason for the change is how hard it was to install Nutcracker 2 locally. You had to download wamp or xampp. These were 300 mbyte downloads. You had to setup a database , .etc, .etc.
Nutcracker 3 is a 12mbyte download, no other installation requirements that to just do the install.
Another reason to go to Nutcracker 3 is speed. To generate a snowstorm effect on my megatree took 200 seconds, on Nutcracker 3 it generates the same thing in < 50ms.

I have failed to communicate that xLights/Nutcracker 3 is the only version people should be using. I believe you are not the only one who is still using the old software.

Please give Nutcracker 3 a try and let me know how it goes.

thanks
sean


Reply
Page 1 / 2
Share: