Nutcracker: new rel...
 
Notifications
Clear all

Nutcracker: new release, Matrix target

27 Posts
10 Users
0 Reactions
12.2 K Views
smeighan
Posts: 2595
Topic starter
(@smeighan)
Famed Member
Joined: 15 years ago
timon wrote:I'm looking at building my matrix but I'd like to do it in modular sections so 1) it can be broken down for storage and 2) allows assembling the matrix in different configurations or adding to it each year. For mine I was looking at 8X8 pixel sections and putting those in a 2X4 grid, 16X32 pixels, but later upgrading it to 3X6, 24X48 pixels.

The way I would address it would be to start with the lower left panel then go to the next panel, etc, then to the next lower panel to the right and so forth.

Right now I don't see how the use Nutcracker as it can't handle modular matrix and I don't thing any of the pixel drivers can arrange the modules to look like a single panel. Hopefully either Nutcracker or the pixel driver boards will allow the modular panel to be referenced as a single array.

could u number how ytour grids would look and paster it here? Maybe i can make nutcracker support them now.

thanks


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

1...........32 no folds and i would like to start from bottom up . is this do able ?
.
.
.
.
42


Reply
timon
Posts: 2149
(@timon)
Noble Member
Joined: 16 years ago

Sean,

I'll post something more complete if needed but for now think of it this way.

Take the existing matrix that Nutcracker builds and call it one module of the final matrix. Then add two fields to set the number of modules in the X and Y direction, with the default being one, which taken with the module size defines complete matrix.

I don't think it matters how you sequence the modules in the array just how you sequence the pixels within each module so I'd keep that the same as the module just to keep it simple. It's assumed that all modules in the array are the same.

Example, if you set the module size to 16X32 pixels and then set the X and Y to 3 and 5 you'd end up with a 48X160 matrix made from 15 modules. Normally the module in a multi-panel matrix would be square but here is no technical reason it needs to be.

So that's it, just one more step than you have now.


Reply
smeighan
Posts: 2595
Topic starter
(@smeighan)
Famed Member
Joined: 15 years ago

Yeah, this would be pretty easy.

You would first build the first object, let's call it GRID1, which is 16x32 grid.

I'll add a new prompt to allow you to build matrices out of existing target.

Target name? GRID1
How many horizontally? 3
How many vertically? 2
New target name? MEGAGRID

Now u just use MEGAGRID to attach effects, I will dothe rest.

About 2-3. Days of work. Just need to get to it.

I am looking into how to make native msq file for lsp folks.

Thanks

timon wrote:Sean,

I'll post something more complete if needed but for now think of it this way.

Take the existing matrix that Nutcracker builds and call it one module of the final matrix. Then add two fields to set the number of modules in the X and Y direction, with the default being one, which taken with the module size defines complete matrix.

I don't think it matters how you sequence the modules in the array just how you sequence the pixels within each module so I'd keep that the same as the module just to keep it simple. It's assumed that all modules in the array are the same.

Example, if you set the module size to 16X32 pixels and then set the X and Y to 3 and 5 you'd end up with a 48X160 matrix made from 15 modules. Normally the module in a multi-panel matrix would be square but here is no technical reason it needs to be.

So that's it, just one more step than you have now.


Reply
Posts: 2171
(@mschell)
Noble Member
Joined: 18 years ago
smeighan wrote:I tried mschell as username, target as 9POL and copied your effect TESTSNOW to be TESTSNOW_SEAN

It works as expected.

Next i tried your target connected to a butterfly effect. It looks ok also.

Well, everytime I tried it, it never would generate a GIF or give me the option to save it.

I'm using FireFox, but it looked like a script error at the site, and not a browser issue.

I've been away from the house for the last few days, and it didn't work any better here than at home on another machine.

I'll try again when I get to a place where I can try it again.


Reply
Page 3 / 6
Share: