OK am I just missing this or what. In the web based NC, there was a setting to fade in or out. I can't seem to find it in 3.02. Is it there?
Sent from my SAMSUNG-Galaxy-SII Skyrocket using Tapatalk 2
dariansdad wrote:OK am I just missing this or what. In the web based NC, there was a setting to fade in or out. I can't seem to find it in 3.02. Is it there?Sent from my SAMSUNG-Galaxy-SII Skyrocket using Tapatalk 2
Nope, it is not there. I will add it to the gap list.
thanks
sean
dariansdad wrote:Here's a tip that worked for me. Open up a blank sequence, load your channel config. Delete all but what you're using for the NC software (ie, in my case, a 12 leg PixTree, Superstar style). Now save that Channel config as a new Ch.Config (Mine is "Nutcracker Export")
Now, when you open the file that you exported from Nutcracker, apply the new ch.Config. You will have to copy/paste into your existing sequence, so there's an extra step, but all in all, It works for me.2nd, You can copy your element channels for NC in a track by itself, move that track to the top, save that channel config, (mine is "2013 Ch Config_Pixtree at Top"). Now when you open the NC exported file, import your new ch Config and everything will be in it's right place. Since you copied the element channels instead of moving them, the effects will be in your main sequence track also.
Both have worked for me.
Hope this helps,
Ron
So far I am not having any luck, I have created a new sequence and called it pixels, I convert to an x-seq that works, I am using X-lights to create all of my elements, I can play it in x-lights and see it, when I export it to LOR I can see it has done its job, the biggest problem right now is when I go to copy and paste Lor doesn't like when I copy the whole sequence, ( I am using a 16 string pixel tree 50 nodes per string) this afternoon I am going to try to copy and paste 1 string at a time and see if that will work, when I try the whole seq Lor says it has encountered a problem and needs to close, I will let you know if the 1 string copy and paste works, not liking this way but if there is a solution please feel free to let me know.
FYI I created a pixel only seq just like you suggested.
Thanks
North Of The Border wrote:So far I am not having any luck, I have created a new sequence and called it pixels, I convert to an x-seq that works, I am using X-lights to create all of my elements, I can play it in x-lights and see it, when I export it to LOR I can see it has done its job, the biggest problem right now is when I go to copy and paste Lor doesn't like when I copy the whole sequence, ( I am using a 16 string pixel tree 50 nodes per string) this afternoon I am going to try to copy and paste 1 string at a time and see if that will work, when I try the whole seq Lor says it has encountered a problem and needs to close, I will let you know if the 1 string copy and paste works, not liking this way but if there is a solution please feel free to let me know.
FYI I created a pixel only seq just like you suggested.Thanks
did you click on the tab on top almost in the middle where it said "OUTPUT TO LIGHT " it need to have a check mark there cheer
barbotte wrote:did you click on the tab on top almost in the middle where it said "OUTPUT TO LIGHT " it need to have a check mark there cheer
Did that still no luck I spent an hour playing it with this afternoon after I copied and pasted every string to my seq and hit play it would not play something about not enough memory for the nodes, this computer is brand new back in Oct windows 7 has me kind of buffaloed here.

