Matrix Sign Model H...
 
Notifications
Clear all

Matrix Sign Model Help

6 Posts
3 Users
0 Reactions
2,141 Views
Posts: 2
Topic starter
(@gbarnes27)
New Member
Joined: 10 years ago
[#42673]

I do all my sequencing in LOR. I have started using RGB and would like an easier way to create messages and things for a RGB Matrix Sign I purchased. Anyway I have messed with xlights for about 2 days and still unable to create a matrix that is 15 nodes across and 10 nodes down. Starting channel from bottom right if you are looking at it from the front.

Any help would be greatly appreciated.

Thanks
Greg


5 Replies
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago

Pretty easy.

xlightsMatrix1

Reply
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago

Now if your matrix is wired over and then back (zig-zag), you need this setup.

Just depends on how its wired.

Oops, sorry, got the wrong screen shot. CHange the 15 to 30 in the Nodes/String.

xlightsMatrix2

Reply
Posts: 2
Topic starter
(@gbarnes27)
New Member
Joined: 10 years ago

Perfect. I think I might be able to figure out how to sequence this sign now. On another note do you know how I can import my mega tree sequences from LOR to xlights? Every time I try to do this it ends up not looking right. I have 12 universes setup each one 1-150 channels but when I import my LOR sequence it looks nothing like its supposed to. I know I am getting to this late but I really would like to use xlights for my display this year due to the easy addition of effects for my house and things.

I appreciate it.

Greg


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

That is a different topic for a different thread, but there are lots of videos on doing this and lots of threads on the xlights forum. I'm not a LOR user so cannot help.


Reply
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago

Sorry, me either. Never used any lor stuff.


Reply
Share: