LOR controller into...
 
Notifications
Clear all

LOR controller into F48 controlled by Xlights

2 Posts
2 Users
0 Reactions
2,140 Views
Posts: 10
Topic starter
(@kmc-pyro)
Eminent Member
Joined: 9 years ago
[#53190]

Greetings from Louisiana,

I hoping someone can help me with my issue.

Simple Version: I can't get an Xlights sequence to light my AC lights

My setup:

Using Xlights, FPP in standalone to F48. F48 has several outputs of pixel data, all working with ZERO issues.
I have a 16 Channel LOR controller connected to serial 3 of the F48.

I can run the test function at the F48/Falcon network interface, through the FPP interface, and in Xlights. When the test activates the channel assigned to the AC lights they come on just fine. BUT I can't get them be recognized in a sequence in any way. They also won't function in "output to lights" mode. Only in test within Xlights. What am I missing here?
What do my model settings need to be?

Screenshots attached.

PS: Non-important, Side-question, can I control individual channels on the LOR contoller, or is it all or nothing?

Screen Shot 2020 11 20 at 11.45.52 PM
Screen Shot 2020 11 20 at 11.46.29 PM

1 Reply
Posts: 344
 TSL
(@tsl)
Reputable Member
Joined: 10 years ago

Are you LOR controllers set to unit I’d 1,2,3 and so on? They need to be.

Sent from my iPhone using Tapatalk


Reply
Share: