great i will try that wiring and see what happens.
In xlights I created 18 universes. 1-16 for Alpha controller and on the innerpage for the alpha I put RS485 output#1 as universe 17 and RS485 output 2 as universe 2. Under these two universes I esstianlly have all new channels, correct.
I am running 15 mini trees off of these two controllers. So I have them set as the following
Tree #1 Univ 17 channel 1
Tree #2 Univ 17 channel 2
and so on using all of my channels on one box then I switch to 18:1, 18:2 etc
You really have been a big help
Great I will try it that way. Makes a little more sense.
In xlights, I setup 18 universes. From my understanding, each universe basically restarts on channels. So I have 1-16 universes setup for the Alphapix and then on the inner webpage I turned on RS485 outputs 1&2 and set them as universe 17 and 18. Then on my mini trees (15 of them), I have them setup as:
Tree1 Univ 17 channel 1
Tree2 Univ 17 channel 2
Tree3 univ 17 channel 3
and so on until I used up the 10 channels on RS485 controller. I then swtiched to 18:1, 18:2 and so on.
Does that sound about right?
You have really helped me out tremendously.
theycalmegriswal wrote:Great I will try it that way. Makes a little more sense.In xlights, I setup 18 universes. From my understanding, each universe basically restarts on channels. So I have 1-16 universes setup for the Alphapix and then on the inner webpage I turned on RS485 outputs 1&2 and set them as universe 17 and 18. Then on my mini trees (15 of them), I have them setup as:
Tree1 Univ 17 channel 1
Tree2 Univ 17 channel 2
Tree3 univ 17 channel 3
and so on until I used up the 10 channels on RS485 controller. I then swtiched to 18:1, 18:2 and so on.Does that sound about right?
You have really helped me out tremendously.
THis is a 10 output, 30 Channel board. and the lights are dumb RGB on the trees, correct? Then each tree would be 3 channels R, G & B so
Tree-1 Universe 17, Channels 1-3 (Output 1)
Tree-2 U-17, C 4-6 (Output 2)
Tree-3 U-17, C 7-9 (Output 3)
.
.
.
Tree 10 U-17, C 28-30 (Output 10)
and then the same for the 2nd board but Universe 18
Ruppro-i was reading through hit nail on the head. I love this site. Wish i would have found it last year. Theycalmegriswal- by next year this will all become second nature. Lol.
Sent from my iPhone using Tapatalk
I tried that on xlights. Only lets me put in one channel. Yes it is a 30 channel and dumb RGB. It asks for start channel (can only select a single channel) and then universe number. Options are offset, end or start of model.
I hope you are right, and this will be second nature. Man, I have rebuilt engines and they aren't this complicated....lol.
theycalmegriswal wrote:I tried that on xlights. Only lets me put in one channel. Yes it is a 30 channel and dumb RGB. It asks for start channel (can only select a single channel) and then universe number. Options are offset, end or start of model.I hope you are right, and this will be second nature. Man, I have rebuilt engines and they aren't this complicated....lol.
We provide you several different ways to define the start channel and yes that's all you need to tell us regarding channels. Then you tell us how many lights/nodes the model has and the string type and from that we calculate the total number of channels.
Yes you do, my problem was figuring it out. I wasn't finding much for tutorials, but ruppro helped me through it. The only thing I have now is some overlapping on channels for some smart pixels on my pillars and garage. The system put in some channels that are overlapping and I think that is what is causing some of the different color issues I am seeing. Example, I have only red selected, but the end of the strands are showing blue.
I set them as universe 7 channel 1 for example, next is 8:1 and so on. xlights is picking the individual channels, is there a way I can change that?
Other than that, xlights is really easy to sequence. Really a great program!
