help needed
 
Notifications
Clear all

help needed

66 Posts
10 Users
0 Reactions
16.1 K Views
Posts: 48
Topic starter
(@wilky37)
Trusted Member
Joined: 11 years ago

hi just tried to connect with the ip address of 192.168.1.200 unfortunately it didn't work


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

You need to set your interface IP to that address and then try the address of the bridge again. It might be best if you were to have a direct conversation with someone. You can PM me and we can set up a time. FYI: My day starts at 5 AM ET, if that has better overlap with you.


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

How do your 2 PCs and MAC connect to the internet? 4-Port Modem/Router? Plug the Bridge into the same device that the PCs and MAC connect to, then try to connect.
What version of Windows are you running?
Do you now how to open a command prompt?


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago
Ruppro wrote:How do your 2 PCs and MAC connect to the internet? 4-Port Modem/Router? Plug the Bridge into the same device that the PCs and MAC connect to, then try to connect.
What version of Windows are you running?
Do you now how to open a command prompt?

this on;y works if your house net is on the 192.168.1.xxx subnet


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago
MartinMueller2003 wrote:this on;y works if your house net is on the 192.168.1.xxx subnet

Yes I know and it is a very common default subnet, so it is worth a try at least. And if it does not work, then we can help him find out what is home network is set to, set a static IP on one of his PCs in the 192.168.1.xxx subnet so he can connect to the bridge and then configure the bridge to be in his home network subnet.


Reply
Page 6 / 14
Share: