Dumb RGB help neede...
 
Notifications
Clear all

Dumb RGB help needed

3 Posts
2 Users
0 Reactions
1,615 Views
Posts: 23
Topic starter
(@downsouth)
Eminent Member
Joined: 10 years ago
[#45700]

The version I am using is xLights32_2017_14.

I don't have any issues except setting up dumb RGB light strips. I am considering using the line model and setting it to one node so I can have 3 channels. I just need to know if this is correct. Then I can finish my setup for this year. I have 5 universes, and the fifth one is RS485. I have 2 30 channel dumb RGB controllers and one LOR CTB16PC for those old by faithful icicle and net lights I've had for a decade. I am good with setting up that end just need to nail down the dumb RGB light strip setup. I really appreciate if anyone can confirm that being the way to go setting it up.


2 Replies
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

Actually you can set it to as many nodes are you have on the string then change the string type to "3 Channel RGB" to represent dumb RGB.


Reply
Posts: 23
Topic starter
(@downsouth)
Eminent Member
Joined: 10 years ago

Hi Gil! Thank you very much. It was the only thing that stumped me.


Reply
Share: