Trying to figure out how to skin this cat. I used HLS last year but want to give Xlights a shot with the whole house model.
I essentially have a matrix on my house. I thought building a custom model for it since not all the elements on the grid are used. Is it easier to do it this way or just create multiple smaller matrix models and then place them on the house?
Thanks!
I'm not quite sure what you mean. Do you have a matrix within your display? Or are you saying you've laid out all your elements as a matrix? Do you have pics to give a better idea? Maybe a screen capture of your display in HLS?
This will be my 3rd year with HLS incorporating XL/NC effects. Setting up and using WHM in NC is very easy. Much easier than setting up in HLS.
Sorry, a picture is worth a thousand words. Here is a link to a video from last year. You will be able to tell by the video how my house is essentially a matrix but with HLS nodes were not assigned in the output.
I have tried creating a custom model in Xlights but when I pull up the node layout it says n1s1, n2s2, n3s3... etc instead of going n1s1, n2s1, n3s1, etc.
yes, make multiple matrix models and just place them on your house. Go to model go to model groups (Under LAYOUT tab), add all models into a group. Call it "Whole House" or something. drop effects on it, you have whole house.
send your xlights_rgbeffects.xml and the picture of your house and ill check it out, send it to xlights@meighan.net
also you can text me at 303 520-2024, ill get on a quick teamviewer with you
thanks
sean
Off topic, how are you hanging/draping the pixel strings from the rooflines down? No support is obvious in the video but I'm sure you're not hanging bare strings either.
Thanks,
-joni-
smeighan wrote:yes, make multiple matrix models and just place them on your house. Go to model go to model groups (Under LAYOUT tab), add all models into a group. Call it "Whole House" or something. drop effects on it, you have whole house.send your xlights_rgbeffects.xml and the picture of your house and ill check it out, send it to xlights@meighan.net
also you can text me at 303 520-2024, ill get on a quick teamviewer with you
thanks
sean
Thanks Sean. I'll go that route. I created a custom matrix using the custom object function and just filling it in with my spreadsheet from excel. It seems to be working fine when placing effects on it. Any reason why that would not work?
rjchu wrote:Off topic, how are you hanging/draping the pixel strings from the rooflines down? No support is obvious in the video but I'm sure you're not hanging bare strings either.Thanks,
-joni-
I used the boscoyo strips from James last year. They worked really well. All I did was just staple them into the trim boards at the roofline.
Custom models, matrix, arch models all work fine. Just drag, size and layout all.

