Chromaflake custom ...
 
Notifications
Clear all

Chromaflake custom models

15 Posts
4 Users
0 Reactions
6,499 Views
Posts: 236
Topic starter
(@afremont)
Reputable Member
Joined: 10 years ago
timstreet wrote:Post a link and I'll be glad to try them.

Sent from my iPhone using Tapatalk

Here you go.


Reply
Posts: 57
(@timstreet)
Trusted Member
Joined: 11 years ago
afremont wrote:Here you go.

This is ChromaFlake1

Is this what you see?


Reply
Posts: 57
(@timstreet)
Trusted Member
Joined: 11 years ago

I've added these to a git repo I'm starting. I'm not sure of the correct names for each snowflake you provided.

https://github.com/timeighty5/xLights-Models


Reply
Posts: 57
(@timstreet)
Trusted Member
Joined: 11 years ago
didjareally wrote:Also there are no splice models for all the shapes/sizes of chromaflakes in the files section of the xlights facebook group

I never found these - do you mind proving assistance?


Reply
Posts: 236
Topic starter
(@afremont)
Reputable Member
Joined: 10 years ago
timstreet wrote:This is ChromaFlake1

Is this what you see?

Yes, you can clearly see that the vertical center line is misaligned. It's also not the most intuitive way to wire it, because I did mine backwards when I was plugging in the lights. I didn't want to wear out the mounting holes by pulling it all back out, so I adjusted the model to match my mistake. Still, it works well but, I'm going to make new models when I get some time.

The 40*60 approach, that I used on the last 3 models, was not a good move since it looks odd in the model preview. Since these models are basically the same width as they are tall, a 40*40 or 60*60 approach might be better. I'm still on the steep part of the learning curve.

Sent from my Moto G (4) using Tapatalk


Reply
Page 2 / 2
Share: