I am reaching out to my fellow xLights folks as I am at my wits end with this one. I have purchased a few SuperStarLights sequences and was able to convert to xLights for the megatree (12 CCRs) sequences that I purchased. Now I have a couple circle (4 CCRs) sequences that I am having extreme difficulty with. Anyone out there have experience with these? Any help would be greatly appreciated. It is imperative that I get this going. TYIA!!
Never done circles in LOR or Xlights, but attached is how the circles look in SuperStar. I would think you would need to create a model in xlights that is the same. Then map to the same channels of your xlights circle models. When you import you will import to the model you created to look like superstar. Then, I would think after you import you could delete the other model, or just keep it for next time. This is just a guess and what I would try. If someone has experience with circles then I'm sure they will chime in.
James
I reached out to Gill and he figured it out. Keep in mind this for SuperStarLights 4CCRs Circle sequences. Their 12CCRs Tree works as explained in the many online videos and the xLights manual.
Here is his solution - "... I got the SuperStar import to work but it's a little tricky because is in Visualization mode. For some reason it seems like all the X and Y values are reversed in his file so to cause xLights to do a reverse when importing a SuperStar file with visualization mode you need to edit the SuperStar file and just a few lines down change "ribbonOrientation" from "vertical" to "horizontal". Then when you do the Import Effects in xLights you need to import onto a Matrix model that is a horizontal matrix 2 high by 100 wide. Then when you get the import dialog you need to select that matrix and type in 2 for X size and 100 for Y size. Then what I did was had 4 circle models that overlayed the matrix channels and it appears to be working."
Thanks for posting your results. It may help someone else down the road.
Sent from my Pixel using Tapatalk

