channel numbering
 
Notifications
Clear all

channel numbering

17 Posts
6 Users
0 Reactions
5,702 Views
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

Boof63....The start channel number is an offset. If you use raw numbering its an offset from the first channel of all channels. But when you use model chaining its an offset from the end of the model you are chaining to. So you need to set the start channel to "1" if you are chaining to the end of another model. If you had End of Model set to "Arch1" and then typed in 10 then your start channel for the model would be 85. So it gives you a way to program a gap if needed. You just happened to program in a 75 channel gap between the models.


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

By the way I believe most of this numbering with model chaining works really nice when you are starting from scratch. It automatically chains and numbers correctly. It's only when you are trying to convert from absolute numbers to chaining that you need to know what to set in the dialog and the flexibility allowed actually can create confusion.


Reply
Posts: 484
Topic starter
(@boof63)
Honorable Member
Joined: 15 years ago

Thankyou Gil :thup::thup::thup::thup::thup:
reckon i have it now, another question please.
Current xl4 setup is universe x channel for my setup in HLS - 2015 show, with these new additions
I realise i will need to redo the universe /channel setups, is there a way to save the "HLS setup"
just in case i need it for something, ie as a backup that i can reuse.
AS this year i am plannning on using Pi2 for show.
Cheers Boof63


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

There is one way to see that info but on a per model basis. If you click on a model in the list on the left the tooltip pops up and shows you the absolute and universe/chan numbering assignments.


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

See all the info in the tooltip?

tooltip

Reply
Posts: 484
Topic starter
(@boof63)
Honorable Member
Joined: 15 years ago

So you raced me Gil , When i do the model layout/channel numbering i need to be aware of the universes need for each set of elements
eg universe 1 is arches 1-4 =300 channels then in Setup U=1 ch = 300, etc for each set of elements that you want on a specific universe
arches 5-8 = 300 channels then in setup U=2 ch=300 etc ??
Also first question can i save/backup my existing U/Ch setup??
Edit : does the backup command do this??
cheers Boof63


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

Free free to look at the backup folder/zip files and see if it saves what you want. I don't know what format you're looking for. You could write a little script that would mine the info from our XML files.


Reply
Page 2 / 2
Share: