Your setup tab is not setup correctly. The first set of information is the most important. You need to have configured 18 networks with (at least) the correct number of channels per network.
DMX Network 1: 300 channels
DMX Network 2: 300 channels
DMX Network 3: 300 channels
DMX Network 4: 300 channels
DMX Network 5: 300 channels
DMX Network 6: 300 channels
DMX Network 7: 300 channels
DMX Network 8: 300 channels
DMX Network 9: 300 channels
DMX Network 10: 300 channels
DMX Network 11: 300 channels
DMX Network 12: 300 channels
DMX Network 13: 468 channels
DMX Network 14: 300 channels
DMX Network 15: 0 channels
DMX Network 16: 0 channels
DMX Network 17: 0 channels
DMX Network 18: 24 channels
dkulp wrote:Your setup tab is not setup correctly. The first set of information is the most important. You need to have configured 18 networks with (at least) the correct number of channels per network.DMX Network 1: 300 channels
DMX Network 2: 300 channels
DMX Network 3: 300 channels
DMX Network 4: 300 channels
DMX Network 5: 300 channels
DMX Network 6: 300 channels
DMX Network 7: 300 channels
DMX Network 8: 300 channels
DMX Network 9: 300 channels
DMX Network 10: 300 channels
DMX Network 11: 300 channels
DMX Network 12: 300 channels
DMX Network 13: 468 channels
DMX Network 14: 300 channels
DMX Network 15: 0 channels
DMX Network 16: 0 channels
DMX Network 17: 0 channels
DMX Network 18: 24 channels
Dan , is this a Lor specific requirement ?
No. HLS import will have similar issues. (actually, potentially worse issues if you don't have your universes sequential)
Technically, you just need 18 networks defined if the input file is using 18 networks. The import won't care if they are DMX, e1.31, LOR, etc....
Also note: you seem to have a 16 channel controller on Universe 17, but not effects in any of those channels. That's OK, but by default it won't map those channels. The recent versions of xLights has a map empty channels check box that would go ahead and map them.
Ok thanks .
The setup specifics are required for importing into Nutcracker/xlights .
I have never had or intended to import anything .
to create export effects I have only ever created enough universes and channels to support the model
