Hello all. I've been messing around with xLights this past week while following along with various Webinars and it's been a blast beginning to learn it. One thing I was trying to accomplish was separating vertical lines from horizontal lines as groups across the display. For instance taking a window frame and making the verticals and horizontals on the single poly line fall into two different groups. Same thing with a house outline. Is there anyway to do this? I did find on GitHub, https://github.com/smeighan/xLights/issues/1814 where it appears some people talked about this, but I'm not sure. It seems as if what I'm trying to do is not possible. Any thoughts?
The we have done it is to create sub-models then assigning just the parts of the model that we want to the different groups. For example (and to use your window model):
Model 1 -> Window1. Sub-models -> W1 Left, W1 Right, W1 Top, W1 Bottom.
Model 2 -> Window2. Sub-models -> W2 Left, W2 Right, W2 Top, W2 Bottom.
Group #1 is "Windows Vertical" to which W1 Left, W1 Right, W2 Left and W2 Right are assigned.
Group #2 is "Windows Horizontal" to which W1 Top, W1 Bottom, W2 Top and W2 Bottom are assigned.
With different props you can decide which part goes into which groups then assign the appropriate sub-models to the proper groups.
algerdes wrote:The we have done it is to create sub-models then assigning just the parts of the model that we want to the different groups. For example (and to use your window model):Model 1 -> Window1. Sub-models -> W1 Left, W1 Right, W1 Top, W1 Bottom.
Model 2 -> Window2. Sub-models -> W2 Left, W2 Right, W2 Top, W2 Bottom.Group #1 is "Windows Vertical" to which W1 Left, W1 Right, W2 Left and W2 Right are assigned.
Group #2 is "Windows Horizontal" to which W1 Top, W1 Bottom, W2 Top and W2 Bottom are assigned.With different props you can decide which part goes into which groups then assign the appropriate sub-models to the proper groups.
I was successful in creating the sub models and I can add effects to them separately when sequencing. I can not find an option to assign them to a group though.
Did you attempt to do this from the layout tab? Go there and click on the group, the sub models should be listed to the right. Click them and use the arrow to move them into the group a place them where you want them. You can then right click on the models list in your sequencer and choose Edit Display Elements to make them visible/hidden and move them up or down in the list.
Hope this helps,
Jeff
Thank you Jeff. I was able to figure it out after reading through the xLights manual and a couple more videos. Pretty fun stuff so far.
