Add Description/Loc...
 
Notifications
Clear all

Add Description/Location/Device ID row

5 Posts
4 Users
0 Reactions
2,018 Views
Posts: 25
Topic starter
(@snowwalker)
Eminent Member
Joined: 16 years ago
[#37917]

On the Setup screen can you add the following rows to the setup page. This would help keep track of component settings. Add -Description - Location - Device ID

Thanks, Jon


4 Replies
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago

This has been discussed a lot lately. The majority of us create spreadsheets for keeping track and to enter user defined data.


Reply
MindTrik
Posts: 1542
(@mindtrik)
Noble Member
Joined: 16 years ago

Buuuuut...the data is ALREADY in NC/XL.....why not just pull it and skip a step we have to take? It should be low priority for sure...but useful when its added.

Sent from my LG-H811 using Tapatalk


Reply
Posts: 25
Topic starter
(@snowwalker)
Eminent Member
Joined: 16 years ago

It just seems logical to have it in all together.
Jon


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

We don't have device id's or descriptions stored elsewhere in the program and I've never seen anyone ask for this. With the new capability to create a block of E1.31 universes my setup only has one line so this wouldn't help me at all. This probably isn't the best place to ask. Each forum usually has a slant to one sequencer and this isn't the place most the xlights folks hang out.


Reply
Share: