Ac light setup and ...
 
Notifications
Clear all

Ac light setup and sequencing questions

19 Posts
8 Users
0 Reactions
6,377 Views
Robo
Posts: 1494
 Robo
Topic starter
(@robo)
Noble Member
Joined: 14 years ago
[#36630]

So I have the majority of my pixels laid out, which is about of my display. I still have a few props that wi consist of single channel Leds like my 4- 5 ch poles with 3 channel stars on top. Icicles on the gutters and fences, etc... I started working on them last night. I was able to make the poles using a custom model consisting of 1 channel wide 25 channels long and repeated each channel 5 times. I used the star model 3 times per pole. Everything looked nice. Also found that you can select all the star and pole in the preview and move them as a group to a different location. That helped immensely. So questions are how to make a model for the preview for icicles lights and how do I sequence the poles and starts to chase up /down the poles and stars?


18 Replies
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

I have 6 porch columns that have 23 pixels each on them. I made a vertical matrix of 6 columns by 23 pixels using the same channel numbers as each column. Each column is also defined separately. The individual pixels have the part of my display checked so they show up on the preview but the matrix is unchecked so it does not show up on the preview. I sequenced using the matrix. You can use bars going up or down on the matrix or even spirals. Bars makes them all go in sync, spirals makes them go different but still up or down depending on your spiral direction, just not in sync.


Reply
Posts: 629
(@dkulp)
Honorable Member
Joined: 14 years ago

For my single channel candy canes on each side of the driveway, I used a "Single Line", "Single Color Red", "12 Strings", 1 light per string" model. You can then mark that as NOT part of the display (as it would just appear as 12 dots) and use custom candy cane models pointing at the same channels for the display portion. By using a single line model, I can then run chases up and down them and such.

For my AC icicles, I used "Vert Matrix", "Single Color White", "1 String", "60 Lights Per String", "20 strands per String". That ends up with a 3x20 grid of white lights all on a single channel that lights up at once so it looks almost like icicles hanging from the roofline. I actually went a little fancier for my my long roof that has 4 sets of icicles and used "4 Strings" (rest the same) which gives a 3x80 grid using 4 channels so I can run chases across the 4 and such. I've included a little screen shot of what my preview looks like for those.

Screen Shot 2015 04 07 at 11.10.18 AM

Reply
Robo
Posts: 1494
 Robo
Topic starter
(@robo)
Noble Member
Joined: 14 years ago

Thanks guys. I will give that a shot tonight. Dan I see that you have singing trees in your screen shot. Care to share how you did that? I have 4 of them on my roof.


Reply
Posts: 1763
(@santacarl)
Noble Member
Joined: 19 years ago
dkulp wrote:For my single channel candy canes on each side of the driveway, I used a "Single Line", "Single Color Red", "12 Strings", 1 light per string" model. You can then mark that as NOT part of the display (as it would just appear as 12 dots) and use custom candy cane models pointing at the same channels for the display portion. By using a single line model, I can then run chases up and down them and such.

For my AC icicles, I used "Vert Matrix", "Single Color White", "1 String", "60 Lights Per String", "20 strands per String". That ends up with a 3x20 grid of white lights all on a single channel that lights up at once so it looks almost like icicles hanging from the roofline. I actually went a little fancier for my my long roof that has 4 sets of icicles and used "4 Strings" (rest the same) which gives a 3x80 grid using 4 channels so I can run chases across the 4 and such. I've included a little screen shot of what my preview looks like for those.

What controller are you using to drive the actual strings? I thought XL would only output to E1.31 controllers(pixels)?


Reply
Page 1 / 4
Share: