3_2_9 no output.
 
Notifications
Clear all

3_2_9 no output.

4 Posts
3 Users
0 Reactions
1,487 Views
Posts: 207
Topic starter
(@onewish1)
Estimable Member
Joined: 14 years ago
[#28539]

I had to download the last 3 versions.. I installed all 3 in order.. wanted just to put some thanksgiving graphics on my matrix .. preview worked fine.. clicked output to lights or tried to run the scheduler and it didn't run.. looked like it was stuck on the 1st frame.. and didn't advance .. checked off output to lights and it advanced in the sequence.. I did manage to get one gif to play in preview and just clicked output to lights and kept that on last night.. is there something wrong with my gif images or is it the program?.. the text effect did the same thing as a couple of gif pics.. just seemed to lock up for a better term... when I clicked output to lights


3 Replies
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago
Onewish1 wrote:I had to download the last 3 versions.. I installed all 3 in order.. wanted just to put some thanksgiving graphics on my matrix .. preview worked fine.. clicked output to lights or tried to run the scheduler and it didn't run.. looked like it was stuck on the 1st frame.. and didn't advance .. checked off output to lights and it advanced in the sequence.. I did manage to get one gif to play in preview and just clicked output to lights and kept that on last night.. is there something wrong with my gif images or is it the program?.. the text effect did the same thing as a couple of gif pics.. just seemed to lock up for a better term... when I clicked output to lights

What hardware controllers and lights?
Did u use the test tab to checkout all the lights?
Static or animated gifs?
Do other effects like butterfly work?
Can you post your xlights_netwotks.xml and your xligh

Sent from my iPad using Tapatalk HD


Reply
Posts: 207
Topic starter
(@onewish1)
Estimable Member
Joined: 14 years ago

sorry to make you nuts.. I was trying to run an animation sequence.. I did a musical sequence and everything is fine.. sorry you even wasted the time reading this


Reply
gdyrdave
Posts: 916
(@gdyrdave)
Noble Member
Joined: 16 years ago

I am having a similar problem but a little different scenario. I run xlights, the configuration is set for renard com8. This is an ftdi usb interface connected to a komby rf1 in transmitter mode. It gives an error when I click on output to lights in test mode. I just says to check connections etc. Also asking if I have the latest ftdi driver. However it works fine in vixen 2.1 and vixen +. It also programs the komby's from the arduino ide. None of these are running at the time so the port should not be locked to one of those.I even rebooted and ran xlights first thing after reboot. Am I missing something?


Reply
Share: