Wiring/sequencing m...
 
Notifications
Clear all

Wiring/sequencing mini trees?

14 Posts
7 Users
0 Reactions
21.4 K Views
Posts: 66
Topic starter
(@macboy)
Trusted Member
Joined: 7 years ago
[#51472]

Hey all. Halloween is over so it’s time to tear apart the spider web and make a few mini trees. Just wondering what the advantages/disadvantages are between spiral wiring vs top to bottom strip wiring. Seems spiral wiring would be easier. Does the way you wire them have significant bearing on how you can then sequence them? I’m thinking only 180 degree trees for this year so I can spread the lights a bit further with more trees/props. I learned at Halloween than even one pixel can go a long way in terms of impact if used in the right prop. I had a grouping of five jackolanterns “singing” through the night. Each with just a single triple pixel.


13 Replies
Jguenther
Posts: 98
(@jguenther)
Estimable Member
Joined: 10 years ago

I just built a few spiral trees and I think they look pretty great.

I think spiral trees might look weird if you just did 180 degrees. A full 360 is needed to get the full spiral effect.


Reply
Posts: 66
Topic starter
(@macboy)
Trusted Member
Joined: 7 years ago
Jguenther wrote:I just built a few spiral trees and I think they look pretty great.

I think spiral trees might look weird if you just did 180 degrees. A full 360 is needed to get the full spiral effect.

What pixel spacing did you use on the spirals? And roughly what vertical spacing between wraps? I often carve spires of ice with one sweeping spiral and it’s pretty beautiful the way you get a double helix look because you can see the rear spiral through the ice. I imagine this is a lot like that?


Reply
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

I chose spiral trees for my 62 mini trees. The last thing I wanted was a bunch of little mini matrices on my mini trees(I have enough of those in the display already). Ultimately it depends on what to do with them. My trees are 42" tomato cages with 100 nodes with 13-14 spiral wraps each. I didn't measure anything, just started wrapping.


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago
uncledan wrote:I chose spiral trees for my 62 mini trees. The last thing I wanted was a bunch of little mini matrices on my mini trees(I have enough of those in the display already). Ultimately it depends on what to do with them. My trees are 42" tomato cages with 100 nodes with 13-14 spiral wraps each. I didn't measure anything, just started wrapping.

Those look great. I want to redo mine and that looks like what I want. Could you be more specific please on how they are built. Did you add vertical metal to cage for a more round look? Are they just zip tied? Are they mounted in strips?

Sent from my SM-A505U using Tapatalk


Reply
Page 1 / 3
Share: