My Micro Trees
 
Notifications
Clear all

My Micro Trees

43 Posts
22 Users
0 Reactions
22.5 K Views
derekbackus
Posts: 565
Topic starter
(@derekbackus)
Honorable Member
Joined: 15 years ago
[#33603]

I just finished my Micro Trees and thought i'd share. I designed these to so I could cut them flat and then bend them by hand after cutting.

Design goals:

- Easy to make/setup
- Cheap
- No zip-ties or measuring or electrical tape.
- Able to use pixels like a mega-tree so I could use Nutcracker and wipe effects in Vixen.

I came up with a bent (by hand) sheet metal tree that has 12mm holes. There are 7 colums of 7 rows for 49 pixels per tree. I'm using 12V pixels from DIYLedExpress because they have a great price, great service and are about the same price as China when you factor in shipping. The reason for 12V pixels is because I can hook multiple trees together in serices. I'm hoping I can get 16 on one E6804 controller. We'll see.

if anyone wants the CAD geometry, let me know and I can post a DXF/PDF of the flat that can be cut out of metal or plastic.

I've attached some pictures and a video:

Raw metal before being bent.

Raw metal bent up by hand.

Painted black.

12V pixels inserted.

Death-Ray cutting the blanks.

Thanks for looking!

Flat
Bent Raw
Bent Painted
Bent with Lights

42 Replies
james70818
Posts: 2045
(@james70818)
Noble Member
Joined: 19 years ago

Great minds think alike! 🙂
I like them, neat trick to do the stitch seam on the bends. I was toying with a similar design out of the ABS sheeting and doing a 20-24" tall 180 degree tree.

I see a ziptie!


Reply
derekbackus
Posts: 565
Topic starter
(@derekbackus)
Honorable Member
Joined: 15 years ago
james70818 wrote:I see a ziptie!

Stop looking so close 🙂

I was feeling lazy. Maybe when the season is over I'll put a couple welds on it.


Reply
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago

Two thoughts:

  • The same concept would work with Coroplast, no?
  • No offense, but I immediately thought of a Dalek when I saw it. "Exterminate!" Not very Christmasy, sorry.

\dmc


Reply
duramadmax
Posts: 904
(@duramadmax)
Noble Member
Joined: 16 years ago
dmcole wrote:
No offense, but I immediately thought of a Dalek when I saw it. "Exterminate!" Not very Christmasy, sorry.

\dmc

I did too...


Reply
Page 1 / 9
Share: