Mini tree question
 
Notifications
Clear all

Mini tree question

55 Posts
12 Users
0 Reactions
22.8 K Views
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago
Skunberg wrote:I don't recall anyone having fuse problems. Lots of people have had gfci problems. If you do have a gfci issue just throw a peice of plywood under each one to get the wire out of the ground.

As said, no problems with blowing fuses, just tripping the GFCI. We are converting them all to pixels this year. Never have problems with pixels, dumb or smart.


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago

Thanks for all the comments.....Hmmmmm GCFI....all my stuff uses those..... I thought about the plywood idea and wondered if it would insulate enough....looks like it will....


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

Don't know that it will help, as this is my first year, but I also am building Mini Trees, using Tomato Cages and Mini ican lights. In HD I found Rustoleum Undercoating, Black Rubberized Undercoating Spray Paint that I am using to prevent GCFI/Fuse issues (I hope :unsure:). My only recommendation is to make sure you let it dry for several days before working w/ the cages, even after 1 day they were still a little tacky and my fingers got coated.


Reply
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

I've had a fair amount of issues with my mini trees with incans over the years. Gets pretty wet in California where I live. Bought new home in 2014 and I'm down from 70+ to 54 mini trees. They were made of 42" tomato cages wrapped in chicken wire with 300 white incan each Upgraded them in 2015 with 100 dumb RGB bullets each. Have 5400 pixels to retrofit from dumb RGB to Pixels this year. 2015 was pretty much 100% DC with no AC power in the yard except my tune to sign and static fence around perimeter of my yard. Not a single tripped GFI or any issue whatsoever once going DC. With cost of pixels so low these days makes no sense to do anything else for me.


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago
uncledan wrote:I've had a fair amount of issues with my mini trees with incans over the years. Gets pretty wet in California where I live. Bought new home in 2014 and I'm down from 70+ to 54 mini trees. They were made of 42" tomato cages wrapped in chicken wire with 300 white incan each Upgraded them in 2015 with 100 dumb RGB bullets each. Have 5400 pixels to retrofit from dumb RGB to Pixels this year. 2015 was pretty much 100% DC with no AC power in the yard except my tune to sign and static fence around perimeter of my yard. Not a single tripped GFI or any issue whatsoever once going DC. With cost of pixels so low these days makes no sense to do anything else for me.

Not surprised about the DC results. In my case...I have 56 strings of LED strings that I can't see throwing away and mini trees was about the only thing I could come up with to utilize them.... We'll see how it works I guess....

I do have a question though..... Did you try your mini trees without the chicken wire? Or, did you find that you needed it to make the trees more full/round? I am actually using 2 cages for each tree...I'm hoping that gives me enough of a rounded/full look......but I hadn't thought of the chicken wire so I'd be interested in hearing more....


Reply
Page 2 / 11
Share: