Mini tree question
 
Notifications
Clear all

Mini tree question

55 Posts
12 Users
0 Reactions
22.8 K Views
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago
[#41641]

Hey All,

I am repurposing some LED mini lights that came off my leaping arches.....which I turned into pixel arches....

Anyhow.... I am planning on using tomato cages and wrap the LED mini strings around the tomato cages and I started to wonder if all that exposed metal on the tomato cages is going to be a problem with blowing fuses in wet weather. Lots of rain in my area during the season.

The LED mini's are all non replaceable types so there's not a lot of area where moisture can get in like there was in the old days of incad mini lights.

Does anyone have any thoughts or experience with such a setup? I'll likely convert to pixels at some point but the big expensed budget this year was for leapers...in the meantime I hope I'm not creating a nightmare by using these cages....

Do I need to put something under them that would insulate or interrupt the path to ground or can I just get away with sitting the bare metal cage on the ground?

Thanks for any discussion/thoughts.....


54 Replies
Posts: 706
(@chadowamsley)
Prominent Member
Joined: 15 years ago

I had 15 of these at one point. I just zip tied the lights to the cage and placed on the ground. I live in Florida.


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago
chadowamsley wrote:I had 15 of these at one point. I just zip tied the lights to the cage and placed on the ground. I live in Florida.

Thanks for the feedback Chadowamsley...... We probably get about the same rainfall.... I couldn't help myself when I ended up with all those lights off the old leapers....Couldn't stand having lights that weren't being used... 😛


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

I don't recall anyone having fuse problems. Lots of people have had gfci problems. If you do have a gfci issue just throw a peice of plywood under each one to get the wire out of the ground.


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

I used metal floral wreath holders with incans wrapped around them and then upgraded to LEDs. Never had an issue with the metal stands, I even pushed them in the ground to keep them from blowing over.


Reply
Page 1 / 11
Share: