I have started to design a mega tree using an all wire frame construction. I have seen small trees done this way using multiple sections for ease of storage. What I was thinking though was to assemble sections equal to the cut lengths of rope light (ie. 24”48”, 36”) total height of the tree would be equal to whatever, based on say 4-5 sections. I am considering rope light for the vertical runs , 16 runs, 1 color. Each section and each rope light would have its own channel (16 channels per section). Assuming I would be able to sequence the traditional mega tree patterns and now sequence so that the section could each have their own patterns. Now I am also thinking the construction of the frame could include a spiral pattern too, giving me many options for my sequences. This would be done with minis not rope. If I do this it too would be one color. I am thinking this could take up to 96 channels to run, 80 would be more likely, and using a helix controller. Am I wacked? Has anyone tried anything like this?
This was my 2/3 mega tree when I used minis and LEDs.
The lights were prestrung on four panels.
Each panel just hooked to the top and was secured at the bottom by two rods.
The panels were 13 ft tall. 12 ft covered by lights.
Joel
