Hi,
My first post for my first mega tree.
I am Michel from the Netherlands (Europe). I am planning to build a roughly 3 meters (10 foot) mega tree.
The materials I have already ordered:
- Falcon F16V3
- The ORIGINAL 12mm Pixel/RGB Mounting Strips (BLACK) (30x95,5"=72 meters)
- 32 x MISR Clip
- 1 x ChromaStar 15" Single Ring (40 nodes)
- 1000 ws2811 5v pixels (20 strands of 50 pixels)
- 2 power supplies: 220V AC to DC 5V 40A 200W
- 100 meters of 3x1,5mm2 (3x˜15awg) wire
- 20 pairs of waterproof 3 pin connectors
- 5 separately ordered WS2811 5v pixel strands 50 pixels.
I was thinking of building a 180 (half tree) with 16 strands of 50 pixels. Including the star that should get to around 3 meters height.
https://www.lightshowhub.com/tools/mega-tree-calculator?nm=My%20Mega%20Tree&ph=110&pb=40&td=12&bmt=bottomDiameter&bd=60&wr=0.5&ns=16&ip=true&mapp=60&mapi=3.4&ma=60&cu=50&lct=lightCountPerString&ls=3&lcps=50&ts=4&bs=5&v=5&w=200&pm=75&bcl=rgb(255%2C%20255%2C%20255)&pcl=rgb(0%2C%20153%2C%20255)&ecl=rgb(221%2C%200%2C%200)&evcl=rgb(0%2C%20153%2C%200)&scl=rgba(255%2C%20153%2C%200)&secl=rgb(255%2C%20190%2C%200)&ant=none
What I am wondering is, given the ordered materials: Would this be your choice, or would you guys build it differently? Maybe a 360 tree, more/less strands....etc.
What is best practice as to wiring this tree? I have been reading several topics, but was unable to find out what is best practice for such a tree.
My questions:
- Power requirements?
- How many strands on one channel/data line?
- Power injection required? How many strands of 50 pixels tied together can work on 1 power/data feed?
- Are there some wiring drawings I could learn from?
Thanks!
Michel
Here's how I made mine. http://doityourselfchristmas.com/forums/showthread.php?42600-Project-180-x-10-ft-Mega-Tree
stallionent wrote:Here's how I made mine. http://doityourselfchristmas.com/forums/showthread.php?42600-Project-180-x-10-ft-Mega-Tree
Hi, very nice indeed!
I tried reading your 37 page long topic, but is seems that's mainly about the mechanical challenges.
I am looking for the electrical information as outlined above.
My way, if using 5 volt pixels 1st 2 strands 50 up and 50 down (power and data in, bottom) /\ (bottom, Power injection only). Wire tops together.

