Thanks for your advice , i will be using plenty of supports as I hope to keep my tree base ring about 18' from ground level. I may also skirt the base to keep things out of sight out of mind in case theives or vandals get ideas.
we have many incidences of copper theft here so this is a big factor i need to consider .
I don't know if any of you plan to use poly strapping for your strings or strip but i found a place that sells 3300 ft rolls for 35$ cdn funds .
a normal roll size is 9000 ft @ 100$
http://www.buyerspackaging.com/OrderInformation/HowToOrder.html
Cheers
angus40 wrote:Thanks for your advice , i will be using plenty of supports as I hope to keep my tree base ring about 18' from ground level. I may also skirt the base to keep things out of sight out of mind in case theives or vandals get ideas.
we have many incidences of copper theft here so this is a big factor i need to consider .
I don't know if any of you plan to use poly strapping for your strings or strip but i found a place that sells 3300 ft rolls for 35$ cdn funds .
a normal roll size is 9000 ft @ 100$
http://www.buyerspackaging.com/OrderInformation/HowToOrder.html
Cheers
I don't see 3300ft. The 5/8 .035 1400lb break strength that people have been using comes in 4200ft.
Is that the one you were talking about? And I didn't see any prices posted on their site?
Brian
This is 1/2 inch wide , i called for the price. 5/8 seems a bit to wide
at 3300 ft , this is much more than i will ever need .
angus40 wrote:This is 1/2 inch wide , i called for the price. 5/8 seems a bit to wideat 3300 ft , this is much more than i will ever need .
If that's more than you'll need wanna split it? I only need 250' so even half a roll is way more than i'll need. Also, is it clear or white?
i am going there on monday to purchase it will post results then .250 ft i can send to you 🙂
If you are planning on taping light strings to tensioned polystraping , it is the horizontal "basket weave " that makes the process work . The contact of the surface area of the vertical straps with the surface area of the horizontal straps keeps the lights aligned. I believe 3/4 " would be better than 5/8". As for the 1/2" - well maybe it would work , I don't know , but there is definitely less strap surface area contact there. Take a close look at the "basket weave" in the tutorial.
well some good news , I managed to get my mega tree pole up and tested tonight .
I have an issue with the top ring getting stuck about 3 ft from the top , you can see it at the .02 mark of the video.
I will fix this and get the lights on in a couple of days .
i was shocked at how many people stopped to gawk in amazement .
Well this mega tree I have built has been a challenge to say the least . I finally
resolved the pulley -lift issue i was having .
5 pulleys later and it works like a dream , however I have 1 last hurdle .
The 50 ft cable is now 4 ft to short with the serpetine configuration to
accommodate the pulley layout.
The first thing I noticed when testing this new design was how effortlessly the the
topper cranks up .
Being that the lift ratio is 4:1 with 1 guide pulley at the top.
I will take pictures and video in daylight .
I managed to get 16 strings up this eve , only to discover i need to add a couple of feet to the pole .
i could not get clearance to tighten the strings , had fun with HLS lighting them though .
here is a little vid . strings were plugged in randomly , and i need a better camera.
also here is a pic of the tree in the daylight
