Redesigning my Mega...
 
Notifications
Clear all

Redesigning my Mega tree

5 Posts
4 Users
0 Reactions
2,971 Views
Posts: 1065
Topic starter
(@olingerjccj)
Noble Member
Joined: 17 years ago
[#18133]

Well I will try to explain my thoughts here. I want to keep the vertical strands and my spiral. I want to add 8 cut outs that look like my attached pic. The red is rope lights and the blue is strobes. This will rest on my pole to the edge of my base. My base it metal and super heavy so could hold the weight. Now my concerns how would I do that and keep the spiral and my vertical strand probably would lose depth you could only see parts of the tree from a certain angles. I maybe could make a pvc thing but not sure if that would give the same affect. I hope all my babbling makes sense?

John

tree part 1

4 Replies
51fordf2
Posts: 1280
(@51fordf2)
Noble Member
Joined: 18 years ago

Maybe instead of a "solid" cutout, you just make it about 3", at the outside "sawtooth"? Basically following the outside sawtooth line, 3" wide, as an outline? Hope that makes sense - that way you could support the rope light, but still see through the tree, for the most part. I can't draw at all, I just tried - the best way to describe it would be like a lightning bolt looking thing, just not tapered at the ends.

Personally, I would make it out of 1/4" round steel, just the outline, and weld it up. I have a 6 foot star, that is built with 3/16" round stock, and it has held up very well, and was quick and dirty.

R


Reply
Posts: 1065
Topic starter
(@olingerjccj)
Noble Member
Joined: 17 years ago

Yeah thinking about it today, I think the lightning bolt thing either out of 3/16" metal my brother in law has a welder so possible. Or PVC. The other way in my pick would prob eliminate my spiral the vert strands would still work. I just wonder if the lightning bolt would give that pine tree look I want?


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

My biggest concern would be wind. Adding any surface to the verticals would be like sail.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I agree with Kelly. Lowes sells a 50-foot coil of 9-gauge galvanized wire though that I think would help a lot. It's bendable yet quite stiff, and it's also weldable so you know it's got some heft. I made my singing choir wire frames out of it, and if you made a zig-zag out of it and ziptied your rope light to it, then ziptied that to your verticals I think you'd really have something.


Reply
Share: